Detail 01
2 inch (50mm) outer tubing
This is the common large-format truss size, so most standard clamps, couplers and bases fit it.
Product detailSKU #1313854574833
Global TrussTR4079 6.56 Ft. (2 m) Triangular Truss
Independent shopping perspective
The Korena take
A 2-meter straight triangular truss segment with 2-inch tubing, for building lighting and DJ structures. For anyone assembling a rig from standard 50mm truss.
Strong match
Who this is for
- Mobile DJs building repeatable goalpost or arch rigs
- Small venues hanging par cans and moving heads overhead
- Adding 2 meters of span to an existing 50mm truss system
Consider the trade-offs
When to look elsewhere
- Anyone with 35mm mini truss — the tubing will not mate
- Solo operators; 23 pounds per stick adds up fast
- Buyers expecting a complete stand kit in one box
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
0.08 inch (2mm) wall thickness
Thicker tube wall than mini truss, which is where the extra stiffness and load headroom comes from.
Detail 03
Triangular, three-chord design
Lighter than a square four-chord stick, but you only get two usable mounting faces for fixtures.
Detail 04
11 7/16 inch (290mm) width
Standard 290mm spacing, so it lines up with other 290mm corners, bases and junctions.
Detail 05
23 pounds per 2m stick
Manageable by one person on the ground, but plan two people for anything you lift or fly.
Detail 06
3/4 inch (20mm) diagonal bracing
The bracing carries the load between chords; it also gives you something to hook safety cables through.
Final check
Know before you order
- 01Couplers, bases, corners and clamps are separate purchases — price the full rig
- 02Confirm the load rating for your span and support before hanging fixtures
- 03Truss ships long and heavy; check freight terms and how you will store 2m sticks
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How long is one section?
6.56 feet, or 2 meters. Sections bolt together end to end, so figure out your total span and divide by two meters to get the count.
02Will this connect to my mini truss?
No. This uses 2 inch (50mm) tubing at 290mm width. Mini truss runs 35mm tubing at 220mm, and the two systems do not interconnect.
03Is it square or triangular?
Triangular — three chords. That gives you a lighter stick than square truss, with two faces to clamp fixtures to instead of four.
04How much does it weigh?
23 pounds for the 2-meter section. Multiply by your section count when you plan lifting, transport and vehicle load.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSize & weight
- Width
- 11 7/16 inch (290mm)
- Weight
- 23
- Outer Diameter
- 2 inch (50mm)
2 detailsOther
- Wall Thickness
- 0.08 inch (2mm)
- Diagonal Bracing
- 3/4 inch (20mm)
