Detail 01
4.92 ft. (1.5 m) length
The short piece you use to hit an exact span without cutting or overshooting with a 2 m segment.
Product detailSKU #1313854574951
Global TrussSQ4111 4.92 Ft. (1.5 M) Square Aluminum Truss
Independent shopping perspective
The Korena take
A 1.5 m square aluminum truss segment, 290 mm wide on 50 mm tubes. For filling exact spans in an SQ-series rig.
Strong match
Who this is for
- Closing out a span where a 2 m segment overshoots
- Trade show booths and DJ rigs that travel in a van
- Rigs standardized on the 290 mm square profile
Consider the trade-offs
When to look elsewhere
- Heavy overhead loads without a rigger checking span and supports
- Owners of a different profile width; ends only mate like to like
- Buyers wanting a ready-to-use lighting stand out of the box
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 in. (50 mm) main tubes
Chord diameter decides which clamps and couplers fit. Check that your hardware is cut for 50 mm before mixing lines.
Detail 03
0.08 in. (2 mm) wall thickness
Wall thickness drives load capacity and dent resistance. It is the number to compare when cross-shopping square truss.
Detail 04
11-7/16 in. (290 mm) width
The frame is 290 mm square, so it only joins segments and corners of the same width.
Detail 05
3/4 in. (20 mm) diagonal bracing
The zig-zag tubes between chords. They carry the shear that keeps a loaded truss from folding.
Detail 06
Weight of 25 per segment
A single piece is a one-person carry. A built span still needs a crew and proper supports.
Final check
Know before you order
- 01Couplers, pins and clips are what join segments — confirm what is included
- 02Measure your total span in 1.5 m and 2 m steps before ordering
- 03Bases, corners and clamps are separate and drive most of the cost
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What size is the truss profile?
11-7/16 in. (290 mm) square, built on 2 in. (50 mm) main tubes with 3/4 in. (20 mm) diagonal bracing.
02Will it bolt to my 2 m segments?
Yes, within the same square line: 290 mm ends mate with 290 mm ends. Different widths or tube diameters will not line up.
03Is it heavy?
A single 1.5 m piece is 25 and one person can carry it. Assembled spans need more hands and proper support.
04Can I use it outdoors?
Aluminum will not rust, so weather is not the issue. Wind load on a truss carrying fixtures is — outdoor rigs need ballast and a wind plan.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSize & weight
- Width
- 11-7/16 in. (290 mm)
- Weight
- 25
- Outer Diameter
- 2 in. (50 mm)
2 detailsOther
- Wall Thickness
- 0.08 in. (2 mm)
- Diagonal Bracing
- 3/4 in. (20 mm)
