Detail 01
Nickel finish
Warmer and slightly duller than chrome. Matches nickel tuners and bridge; next to chrome parts the difference shows.
Product detailSKU #1273888006506
GibsonJack Plate With Screws - Nickel
1/8
Independent shopping perspective
The Korena take
Replacement output jack plate for Gibson-style guitars, in nickel. For repairing a cracked or missing plate on an existing instrument.
Strong match
Who this is for
- Replacing a cracked or worn jack plate on a Les Paul
- Swapping a worn plate to match nickel hardware
- Keeping a spare in a repair kit or gig bag
Consider the trade-offs
When to look elsewhere
- Guitars with a recessed barrel jack or jackplate-free body routing
- Anyone needing the jack itself — this is the plate
- Bodies whose existing plate has a different screw hole spacing
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Screws included
No trip to the hardware store for two small wood screws that are hard to size correctly.
Detail 03
Gibson part
Cut to Gibson body routing and screw spacing, so it drops onto factory holes without redrilling.
Detail 04
Plate only
The output jack, nut and washer are separate. You reuse yours or buy a jack alongside.
Final check
Know before you order
- 01The jack itself is not included — only the plate and mounting screws
- 02Check your existing screw hole spacing before ordering a replacement
- 03A crackling jack is usually a bad solder joint, not the plate
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this come with the jack?
No. This is the plate and its mounting screws. The output jack, nut and washer are separate parts.
02Will it fit a non-Gibson guitar?
Only if the body routing and screw spacing match the Gibson pattern. Measure your existing plate before ordering.
03Nickel or chrome — which do I need?
Match your other hardware. Nickel is warmer and softer looking; chrome is brighter and more mirror-like. Side by side the mismatch is visible.
04Do I need to solder anything?
Not to fit the plate itself. If you also replace the jack, that requires soldering two wires.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51273888006506
Worth comparing
1 of 12
More from Gibson
1 of 8
