Detail 01
10U rack space
Ten rack units of vertical mounting, about 17.5 inches of face height for rackmount gear.
Product detailSKU #1274228064143
GatorGRC-Base-10 10U Rack Base with Casters
1/3
Independent shopping perspective
The Korena take
A 10U rack base on casters for building a rolling rack. For gear that needs to move between rooms or gigs without being lifted.
Strong match
Who this is for
- Rolling a power amp and processor rig into a venue
- Studio racks that get repositioned but stay in one building
- Deep gear that overhangs shallower rack cases
Consider the trade-offs
When to look elsewhere
- Anyone needing a closed, protected case for shipping or trailer transport
- Shallow gear only — you're paying for depth you won't use
- Tight stage footprints where a 25-inch-wide box is in the way
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
21 inch front rail to rear rail
Deep enough for full-size power amps and long-chassis gear that won't fit shallow racks.
Detail 03
Casters
Roll it loaded instead of lifting 32 pounds plus gear. Watch for thresholds and stairs.
Detail 04
25 x 21.5 x 27 inch exterior
Plan floor and vehicle space around this, not the rack space number.
Detail 05
32 lb empty
Add your gear on top of that — a loaded 10U rig gets heavy fast.
Final check
Know before you order
- 01Measure your deepest unit front to back before committing to this rack
- 02Rack screws and washers for your gear are a separate buy
- 03Confirm your vehicle's load height — you're rolling, not carrying, a tall box
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How much gear fits in 10U?
Ten rack units. A 2U power amp, 1U processors and a 3U drawer would fill most of it. Total face height is about 17.5 inches.
02How deep is it really?
21 inches between front and rear rails, and 22.5 inches from the front rail to the rear lid. That covers most full-depth rackmount gear.
03Can I roll it fully loaded?
That's what the casters are for. Loaded weight is your gear plus the 32-pound base, so use a ramp rather than lifting it into a vehicle.
04Does it come with rack screws?
Buy rack screws separately, and match them to your gear's rack ears.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSize & weight
- Weight
- 32
4 detailsOther
- Exterior
- 25 inchx21.5 inchx27 inch
- Front Rail to Rear Lid
- 22.5 inch
- Rackable Space
- 19.25 inchx17.5 inchx21 inch
- Front Rail to Rear Rail
- 21 inch
