Detail 01
Interior 25 x 20 x 8 in.
The 8 in. depth clears taller consoles that will not fit shallower mixer cases. Check your deepest point.

Independent shopping perspective
A 24.8 lb road case for mixers up to 25 x 20 in. with 8 in. of depth. For touring use where gear takes real handling.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
The 8 in. depth clears taller consoles that will not fit shallower mixer cases. Check your deepest point.
Detail 02
About 2.5 in. of shell per side. Plan van and shelf space off this number, not the mixer's.
Detail 03
Heavier than lighter mixer cases before you put anything in it. That weight is the protection.
Detail 04
Made for repeated truck loading and stage handling, not occasional transport between rooms.
Detail 05
A mixer much smaller than 25 x 20 in. will move around inside unless you add padding.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
Up to 25 x 20 in. with 8 in. of depth. Measure your console at its tallest point, including knobs and any rear jacks left connected.
This one is deeper at 8 in. versus 6 in., but narrower in footprint at 25 x 20 in. Match the case to your mixer's actual measurements.
24.8 lbs empty. With a mid-size console inside, expect a two-person lift into a vehicle.
It will fit, but it will shift. Add foam or padding to fill the gap if your console is well under 25 x 20 in.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.