Detail 01
Interior depth of 4-1/4 to 6-1/2 inches
Depth, not footprint, is what usually kills a fit. Measure your mixer with knobs and faders standing up.
Product detailSKU #1274228064503
GatorG-MIX ATA Rolling Mixer or Equipment Case Black 25x20x8 in.
1/10
Independent shopping perspective
The Korena take
ATA rolling case for a mixer or other flat equipment. For engineers and DJs hauling a console to venues on a regular schedule.
Strong match
Who this is for
- FOH engineers moving a console between venues weekly
- Consoles too large and awkward to carry by hand
- Gear loaded in and out of trailers and vans
Consider the trade-offs
When to look elsewhere
- Tall gear — interiors run 4-1/4 to 6-1/2 inches deep
- Anyone wanting a light carry; empty weights run 15 to 30 lbs
- Rack-mount units, which need a rack case instead
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Several interior sizes
Interiors run from 12 x 23-1/4 inches up to 22 x 46 inches. Pick by your console's actual footprint.
Detail 03
Exterior runs several inches over interior
Shell and padding eat space. Check the exterior figure against your vehicle's cargo opening, not the interior one.
Detail 04
Empty weight 15 to 30 lbs by size
That's before the console goes in. The 22 x 46 and 24 x 36 sizes become a two-person lift into a vehicle.
Detail 05
ATA-style build with wheels
Rigid enough for repeat truck loading, and it rolls on flat ground. You still lift it over a tailgate.
Final check
Know before you order
- 01Sizes differ a lot — confirm which interior you're ordering before checkout.
- 02Measure your mixer's height including knobs, faders and rear connectors.
- 03Plan a separate bag for cables, snakes and power supplies.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What size mixer will fit?
Depends on the size you order. Interiors run from 12 x 23-1/4 inches up to 22 x 46 inches, with only 4-1/4 to 6-1/2 inches of depth. Measure height first.
02How much does it weigh empty?
15 lbs for the 12 x 24, 21 lbs for the 20 x 30, 28 lbs for the 24 x 36 and 30 lbs for the 22 x 46. Your console adds to that.
03Can I put rack gear in it?
No. There are no rack rails. This is for flat-bottom equipment like mixers and controllers.
04Will my mixer fit if the knobs stick up?
Only if total height stays under the interior depth — 4-1/4 inches on the smallest size, 6-1/2 on the larger ones. Measure to the top of the tallest knob.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
4 detailsOther
- 12x24
- Interior - 12 inch x 23.25 inch x 4.25 inch, Exterior - 27.25 inch x 14.5 inch x 7.75 inch, Weight - 15 lbs.
- 24x36
- Interior - 24 inch x 36 inch x 6.5 inch, Exterior - 27.25 inch x 40 inch x 10 inch, Weight - 28 lbs.
- 22x46
- Interior - 22 inch x 46 inch x 6.5 inch, Exterior - 27.5 inch x 53.75 inch x 12.5 inch, Weight - 30 lbs.
- 20x30
- Interior - 20 inch x 30 inch x 6 inch, Exterior - 22.5 inch x 34.5 inch x 9.75 inch, Weight - 21 lbs.
