Detail 01
Bi-amped power output
The LF section is specified at 270 Wrms Class G, while the HF section is specified at 80 Wrms Class AB+B.
Product detailSKU #1500000239920
FriedmanASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet
1/5
Independent shopping perspective
The Korena take
Built for modeler and profiler rigs, the ASC-10 is a 1x10, two-way active stage monitor with 500W of analog bi-amped power in a guitar-cabinet-style enclosure. Place it where an amp normally sits in the backline when you want a conventional cabinet look while using a modeling setup. Its separate LF and HF amplifier sections work with the 10-inch Celestion woofer and compression driver. Rear-panel level, low-cut, and ground-lift controls accompany a balanced 1/4-inch input and balanced XLR link output.
Strong match
Who this is for
- Stage modeler or profiler rigs needing a powered monitor placed in a conventional guitar-amp backline position.
- Onstage setups needing level adjustment, low-cut filtering, and a ground-lift switch at the monitor.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Speaker system
A Celestion 10-inch TF1025E woofer handles the low-frequency section, with a PETP-film compression driver for high frequencies.
Final check
Know before you order
- 01Configured as an active stage monitor for use with modelers and profilers.
- 02Its listed connections are a balanced 1/4-inch input and balanced male XLR link output.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What type of rig is the ASC-10 made for?
It is configured as a 1x10 two-way active stage monitor for use with modelers and profilers.
02Where can it sit onstage?
It is designed to sit behind you where a traditional guitar amplifier would normally be placed.
03What controls are provided?
The rear panel has a level control, low-cut filter switch, and ground-lift switch.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsSound
- High Frequency Transducer
- Celestion PETP film compression driver with 1” voice coil
- Frequency Response
- 58Hz -18kHz
- High Frequency Dispersion
- Optical Wave Guide
- Frequency Range
- 50Hz - 20kHz
- Low Frequency Transducer
- Celestion - 10” TF1025E woofer
3 detailsPickups & controls
- Controls
- Level knob , Low-cut filter switch, Ground lift switch
- Low Cut Filer Switchable
- 3rd order Butterworth @ 100Hz
- Electronic Crossover
- 4th order
2 detailsBody & build
- Color
- Red
- Hardware
- Strap handle, Rubber feet / Rubber Strips
7 detailsConnections & power
- Connectors
- Balanced 1/4” input / Balanced male XLR link output
- Input Sensitivity
- 775mV (0dBu)
- Maximum Power
- 500W
- Input Impedance
- 20k Ohm Balanced / 10k Ohm Unbalanced
- Power Consumption
- 1.7A/0.85A 115Vac/230Vac
- 1 8 Power Pink Noise
- 150VA
- Power Output
- LF: 270Wrms Class G / HF: 80Wrms Class AB+B
1 detailsSize & weight
- Weight
- 34
7 detailsOther
- Configuration
- 1x10” 2-Way Active Stage Monitor for use with modelers/profilers
- Enclosure
- Black Texture painted, Baltic birch plywood construction
- Assembly
- Made in USA using premium worldwide components
- Indicators
- Power, Protect
- Amplifier Protection
- Short circuit, Clip-limiter, Overheat mute, SOA output stage, Driver DC protection, Subsonic filter, Turn-on mute and soft ramp, Turn-on inrush current limiting
- Maximum Peak SPL
- 129dB
- Cooling
- Convection
