Detail 01
3-saddle design
Each saddle carries two strings, so intonation is a compromise per pair. Traditional, but less precise than 6 saddles.
Product detailSKU #1303152053103
FenderVintage Tele 3-Saddle Bridge
Sale
1/2
Independent shopping perspective
The Korena take
Replacement 3-saddle bridge for vintage-style Telecasters. For players restoring an older Tele or converting a modern one to traditional spec.
Strong match
Who this is for
- Restoring a vintage-spec Telecaster to original hardware
- Converting a 6-saddle Tele bridge to traditional 3-saddle
- Replacing a worn, corroded, or damaged Tele bridge plate
Consider the trade-offs
When to look elsewhere
- Players who need per-string intonation accuracy
- Non-Telecaster body shapes — the plate and screw pattern won't match
- Anyone unwilling to check intonation and string height after install
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Telecaster body shape fit
Drilled for the Tele bridge footprint. Screw spacing and pickup route must match your body or you'll be redrilling.
Detail 03
Bridge plate with pickup mount
The bridge pickup mounts to the plate itself, so the plate becomes part of the pickup's shielding and tone.
Detail 04
Vintage-style plate
Includes the raised side lips of the original design, which get in the way of palm muting and some picking angles.
Final check
Know before you order
- 01Confirm your body's bridge screw pattern matches before ordering — routes vary by model
- 02Strings, pickup, and control wiring are separate; this is bridge hardware
- 03Plan on re-intonating and resetting string height after the swap
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit an American Standard Telecaster?
Modern Teles often use a 6-saddle bridge with a different screw pattern and plate shape. Check your existing bridge footprint against this vintage-style plate first.
02Can I intonate a 3-saddle bridge properly?
Not per string. Each saddle splits the difference between two strings. Angled compensated saddles improve it, but it stays a compromise.
03Does the bridge pickup come with this?
No. This is the bridge hardware. Your existing bridge pickup mounts to the plate.
04Do I need to solder anything?
The bridge plate itself bolts on, but you'll need to unmount and remount the bridge pickup, and the ground wire runs under the plate.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SS
1 detailsBody & build
- Body Shape
- Telecaster
