Detail 01
Bright, Contour, Vintage, and Overdrive selections
Four selectable functions provide quick changes before further EQ adjustment.
Product detailSKU #1500000443110
FenderRumble 100 100W 1x12" Bass Combo Amp - Ivory
1/9
Independent shopping perspective
The Korena take
At 22 lb., the ivory Rumble 100 V3 is a 100W Class-D bass combo built around a ported lightweight-plywood cabinet and one 12-inch Eminence Special Design speaker. Bright, Contour, Vintage, and Overdrive selections combine with four-band EQ for direct tone adjustment. The rear-panel XLR line out includes ground lift and pre/post switching, and the amp adds an effects loop, stereo aux input, and headphone output. Optional compatible one-button footswitches can operate the overdrive.
Strong match
Who this is for
- Home practice with a stereo aux input and headphone output.
- Rehearsal or small-stage bass use requiring 100W through a single 12-inch speaker.
- Recording or mixer connections using the XLR line out with ground-lift and pre/post options.
Consider the trade-offs
When to look elsewhere
- Players requiring the overdrive footswitch to be supplied; compatible one-button footswitches are sold separately.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four-band EQ
Bass, low-mid, high-mid, and treble each have dedicated controls.
Detail 03
XLR line out with ground lift and pre/post switch
The line output includes both a ground-lift function and selectable pre/post routing.
Detail 04
Ported 1x12 cabinet
The cabinet is ported and uses one 12-inch speaker.
Final check
Know before you order
- 01The listed compatible one-button Economy, Vintage, or LED footswitches are sold separately.
- 02The amplifier is specified for 120V operation.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does the Rumble 100 have a headphone output?
Yes, and it also has a 1/8-inch stereo auxiliary input.
02Can I connect it to a mixer or recording setup?
Yes. Its XLR line out has ground lift and a pre/post switch.
03What speaker does it use?
One 12-inch Eminence Special Design speaker.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Effects Loop
- 1/4 inch send/return
- Wattage
- 100W at 8 ohm
- Speaker Configuration
- 1x12 inch
- Speaker
- 12 inch Eminence Special Design
2 detailsPickups & controls
- Controls
- Gain, Bright on/off, Contour on/off, Vintage on/off, Drive, Overdrive on/off, Level, Bass, Low-mid, High-mid, Treble, Master volume
- Footswitch Compatibility
- 1-button Economy, Vintage or LED footswitch, sold separately
2 detailsBody & build
- Color
- Ivory
- Cabinet Material
- Lightweight plywood
4 detailsConnections & power
- Auxiliary Input
- 1/8 inch stereo
- Headphone Output
- Yes
- Voltage
- 120V
- Input
- 1/4 inch
4 detailsSize & weight
- Height
- 18.5 inch
- Weight
- 22
- Depth
- 14 inch
- Width
- 16.5 inch
11 detailsOther
- Amplifier Jewel
- Red LED
- Guitar Center Exclusive
- Yes
- Model
- Rumble 100 V3
- Amplifier Type
- Class-D
- Line Out
- XLR with ground lift and pre/post switch
- Front Panel
- Painted metal
- Handle
- Molded plastic strap with nickel-plated caps
- Cabinet Design
- Ported
- Product Type
- Bass combo amp
- Channels
- One with selectable Bright, Contour, Vintage and Overdrive
- Series
- Rumble
