Detail 01
Pre-slotted synthetic bone nut
Pilot grooves establish string spacing; the final string slots still need to be cut.
Product detailSKU #1500000407325
FenderRoasted Jazzmaster Neck, Block Inlays, 22 Medium Jumbo Frets, 9.5" Radius, Modern C Shape Natural
Independent shopping perspective
The Korena take
Built as a genuine Fender Jazzmaster replacement neck, this natural roasted-maple neck combines a Modern C profile, 9.5-inch-radius fingerboard, and 22 medium-jumbo frets for the modern playing feel Fender describes. Black pearloid block inlays provide the visual detail, while the synthetic bone nut arrives with pilot grooves for string spacing. It is an installation project, not a finished drop-in assembly: final nut slots require qualified work, and fitting, fret work, and setup may also be needed.
Strong match
Who this is for
- A Jazzmaster neck replacement project requiring a Modern C profile, 9.5-inch radius, and 22 medium-jumbo frets.
- An instrument build or repair handled by qualified personnel for nut cutting, fitting, and setup.
Consider the trade-offs
When to look elsewhere
- Installations without qualified final nut-slot cutting and potential fitting, fret work, and setup procedures.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
9.5-inch fingerboard radius and 22 medium-jumbo frets
These are the playing-surface details Fender associates with a modern feel.
Detail 03
Satin urethane back and gloss urethane front
The neck’s finish treatment differs between its back and front.
Detail 04
Vintage-style butt-adjust truss rod
The truss rod is specified as a vintage-style butt-adjust design.
Final check
Know before you order
- 01Final nut slots must be cut by qualified personnel.
- 02Neck-pocket fitting, fret work, and other setup procedures may be required during installation.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Are the nut slots ready for final string installation?
No. The synthetic bone nut has pilot grooves for spacing, but qualified personnel must cut the final string slots.
02Can installation require work beyond cutting the nut?
Yes. Fitting the neck to the pocket, fret work, and other instrument setup procedures may be required.
03What are the fingerboard dimensions?
It has a 25.5-inch scale length, 9.5-inch radius, and 22 medium-jumbo frets.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SS
5 detailsPlayability
- Nut Material
- Synthetic bone
- Fret Size
- Medium jumbo
- Nut Width
- 1.685
- Number of Frets
- 22
- Scale Length
- 25.5
8 detailsBody & build
- Color
- Natural
- Fingerboard Material
- Roasted maple
- Position Inlays
- Black pearloid blocks
- Body Shape
- Offset
- Body Finish
- Satin urethane on back, gloss urethane on front
- Side Dots
- Black
- Neck Wood
- Roasted maple
- Neck Finish
- Satin urethane on back, gloss urethane on front
1 detailsOther
- Truss Rod
- Vintage-style butt adjust
