Detail 01
#3 x 3/8 inch
Thin shaft, just over a third of an inch long. Sized for thin plates into a body, not structural mounting.
Product detailSKU #1273888004116
FenderReplacement Screws 3x3/8 SM RD HD NI
Independent shopping perspective
The Korena take
Pack of 3x3/8-inch nickel round-head sheet metal screws. Replacement hardware for pickguards, control plates and similar small mounting jobs.
Strong match
Who this is for
- Replacing stripped or rusted pickguard screws
- Matching nickel hardware on an existing guitar
- Keeping spares for small mounting jobs on hand
Consider the trade-offs
When to look elsewhere
- Neck mounting or bridge posts — these are far too small
- Anyone needing chrome, gold or black hardware to match
- Jobs requiring a flat or countersunk head profile
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Sheet metal thread
Coarse, self-tapping into wood. Bites in existing pilot holes without needing a machine-thread insert.
Detail 03
Round head
Domed top sits above the surface rather than sinking flush. Wrong look if the original screws were countersunk.
Detail 04
Nickel finish
Matches nickel tuners and bridges. Next to chrome hardware it reads slightly warmer and less mirror-bright.
Final check
Know before you order
- 01Compare against an existing screw before ordering — head shape must match
- 02A stripped hole needs filling before a same-size screw will hold
- 03Use a properly fitting driver; small heads cam out easily
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these work as pickguard screws?
That is the common use for this size. Confirm your existing screws are round head and the same length before swapping.
02How many screws are in the pack?
This is sold as a multi-screw pack of the same size and finish. Check the quantity listed at checkout before ordering.
03Can I use these on any brand of guitar?
Yes, if the hole size and screw length match. The thread is standard sheet metal, not brand specific.
04What if my hole is stripped out?
Fill it with a wood toothpick and glue, let it cure, then redrill a small pilot. A new screw alone will not grab.
