Detail 01
27-inch scale length
Changes a standard-scale guitar conversion into a baritone configuration.
Product detailSKU #1500000316266
FenderBaritone Telecaster Neck, 22 Medium Jumbo Frets
1/3
Independent shopping perspective
The Korena take
Take a standard-scale Fender or Squier by Fender guitar into 27-inch baritone territory with this genuine Baritone Sub-Sonic replacement neck, intended for B-to-B tuning. The maple neck has a modern C profile, a 9.5-inch-radius fingerboard, and 22 medium-jumbo frets. Its nut is pilot-grooved to position strings before final slot filing, while the back receives a satin finish for smooth playability. Treat the conversion as luthier-level work: nut cutting, neck-pocket fitting, fret work, and setup may be required.
Strong match
Who this is for
- Converting a standard-scale Fender or Squier by Fender guitar to a 27-inch baritone setup.
- Baritone projects intended for B-to-B tuning with 22 medium-jumbo frets.
Consider the trade-offs
When to look elsewhere
- Installations without qualified nut-slot cutting and the required instrument setup work.
- Projects that need to retain a standard-scale guitar length.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Pilot-grooved nut
Marks string locations before final nut-slot filing.
Detail 03
9.5-inch radius and 22 medium-jumbo frets
Defines the fingerboard radius and fret count for the conversion.
Final check
Know before you order
- 01Nut slots must be cut by qualified personnel.
- 02Installation may also require fret work, neck-pocket fitting, and other setup procedures.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can this make a standard-scale guitar into a baritone?
Yes. It converts a standard-scale guitar to a 27-inch-scale baritone.
02Is the nut ready for final strings and setup?
No. It has pilot string-location grooves, but qualified personnel must cut the nut slots.
03What tuning is it intended for?
It is intended for B-to-B tuning.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SS
8 detailsPlayability
- Nut Material
- Plastic
- Truss Rod Nut
- 3/16” Hex at Headstock
- Fret Size
- Medium Jumbo
- Nut Width
- 1.650
- Number of Frets
- 22
- Radius
- 9.5” (241 mm)
- Scale Length
- 27
- Neck Shape
- “C” Shape
9 detailsBody & build
- Neck Mounting
- 4-Bolt
- Fingerboard Material
- Available with a Maple or Pau Ferro Fingerboard
- Position Inlays
- Black Dot on Maple and White Dot on Pau Ferro
- Body Style
- “C” Shape
- Neck Thickness
- 1st Fret - .830” (21.08 mm), 12th Fret - .900” (22.86 mm)
- Body Shape
- “C” Shape
- Body Finish
- Gloss Urethane
- Neck Wood
- Maple
- Neck Finish
- Gloss Urethane
3 detailsOther
- Tuner Mounting
- Dual Guide Pin
- Headstock Thickness
- .540” (13.71 mm)
- Truss Rod
- Standard
