Korena
Product detailSKU #1500000395417

Empress EffectsParaEq MKII Effects Pedal Blue

Empress Effects
bluespopdjentprogressive metalrockalternative
Empress Effects ParaEq MKII Effects Pedal Blue
1/3

Independent shopping perspective

The Korena take

ParaEq MKII is a blue EQ pedal for detailed adjustment when an instrument needs more space in a mix or a feedback issue needs attention. Its low-noise, transparent signal path and 27V internal operation are paired with +30dBu of specified headroom, aimed at clean operation without unwanted clipping. The compact enclosure uses 9VDC center-negative power through a 2.1mm barrel connector and requires 300mA, making its power requirement an important part of pedalboard planning.

Empress Effects ParaEq MKII Effects Pedal Blue product detail
Product studyEmpress Effects ParaEq MKII Effects Pedal Blue
Empress Effects ParaEq MKII Effects Pedal Blue alternate view
Alternate view

Strong match

Who this is for

  • Managing an instrument's place in a mix when precise EQ control is needed.
  • Addressing a feedback issue with precise EQ control in a pedal signal chain.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

27V internal operation and +30dBu headroom

Supports the pedal's stated clean headroom without unwanted clipping.

Detail 02

4.8 by 2.6 inches; 2.5 inches high including controls

These dimensions help plan its physical space on a pedalboard.

Detail 03

9VDC center-negative, 2.1mm barrel, 300mA

These are the listed power connection and current requirements.

Final check

Know before you order

  1. 01Provide 9VDC center-negative power through a 2.1mm barrel connector with 300mA available.
  2. 02Allow for a 4.8 by 2.6-inch footprint and 2.5-inch height including controls.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What power does the ParaEq MKII require?

It requires 9VDC center-negative power through a 2.1mm barrel connector and draws 300mA.

02What are its pedalboard dimensions?

It is 4.8 inches long, 2.6 inches wide, and 2.5 inches high including controls.

03What is the listed headroom?

The specified headroom is +30dBu.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsSound
Frequency Response 3db
22Hz - 25kHz
1 detailsPickups & controls
Height Including Controls
2.5”
1 detailsBody & build
Color
Blue
4 detailsConnections & power
Input Impedance
1MΩ
Output Impedance
100Ω
Power Input Connector
2.1mm Barrel Connector
Input Voltage
9VDC Centre-Negative
4 detailsSize & weight
Length
4.8”
Weight
1
Height Enclosure Only
1.5”
Width
2.6”
4 detailsOther
Required Current
300mA
Headroom
+30dBu
Noise
107dB
Total Harmonic Distortion
0.05%

Complete your setup

Worth comparing

More from Empress Effects