Detail 01
Dual Engine routing
Two delays may operate at once in serial, parallel, or left/right configurations.
Product detailSKU #1500000052889
Empress EffectsEchosystem Dual Delay Effects Pedal
dynamicambientpost rockshoegaze
1/5
Independent shopping perspective
The Korena take
Echosystem is a dual-delay pedal for building traditional delay sounds and more layered arrangements from the same unit. Its more than 36 algorithms span 12 types, including digital, tape, analog, ambient, multi-tap, reverb-combo, and Whisky modes. Run two engines simultaneously in serial, parallel, or left/right routing, each with its own controls, then save settings in up to 35 presets. Global or local tap tempo, direct delay-time control, selectable bypass behavior, cabinet simulation, and broad Control Port options make it suited to detailed pedalboard and recording setups.
Strong match
Who this is for
- Combining two delay engines in serial, parallel, or left/right stereo routing.
- Saving repeatable delay configurations in up to 35 presets.
- Recording, practicing, or playing without an amp using one of three cabinet-simulator variations.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Tap functions
Provides global tap tempo and local tempo with subdivisions on all modes.
Detail 03
Bypass options
Can use true bypass or buffered bypass; buffered bypass allows trails.
Detail 04
Universal Control Port
Supports expression pedal, external tap, control voltage, external audio input, and MIDI through a standard 1/4-inch jack.
Detail 05
Output 2 transformer isolation
Intended to eliminate ground loops during stereo operation with two amps.
Detail 06
Power
Requires 9V power at 300 mA through a 2.1 mm barrel connector.
Final check
Know before you order
- 01Provide 9V power capable of 300 mA through a 2.1 mm barrel connector.
- 02For stereo operation with two amps, Output 2 has transformer isolation to address ground loops.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can Echosystem run two delays together?
Yes. Its two engines can run simultaneously in serial, parallel, or left/right routing, with a full set of controls for each.
02How many presets can it store?
Up to 35 presets.
03Does it support MIDI or an expression pedal?
Yes. The Universal Control Port supports MIDI and expression, along with external tap, control voltage, and external audio input.
04Can it retain delay trails when bypassed?
Yes, when configured for buffered bypass. It can also be configured for true bypass.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response 3db Dry
- 10Hz – 50kHz
- Frequency Response 3db Wet
- 10Hz – 23.4kHz
10 detailsConnections & power
- Input Impedance
- 1MΩ
- Output Impedance
- 100Ω
- Output Impedance Transformer
- 600Ω
- Input Headroom Wet 12db Pad
- +10.8 dBu
- Power Input Voltage
- 9V
- Input Headroom Wet 6db Pad
- +5.7 dBu
- Input Headroom Wet No Pad
- +0.5 dBu
- Output Headroom
- +16.2dBu
- Input Headroom Dry
- +10.0 dBu
- Power Input Connector
- 2.1mm barrel connector
1 detailsSize & weight
- Dimensions
- 3.75 x 5.7 x 1.75 (enclosure only, 2.25 including controls) in.
5 detailsOther
- Total Harmonic Distortion Dry
- 0.09%
- Dynamic Range Dry
- 106.9 dBA
- Dynamic Range Wet
- 105.5 dBA
- Required Current
- 300mA
- Total Harmonic Distortion Wet
- 0.22%
