Detail 01
NANOWEB coating
Thin coating over the whole string. Blocks sweat and grime from the windings, so tone lasts far longer than uncoated.

Independent shopping perspective
Coated long-scale bass strings in super light .040-.095. For 4-string players who want reduced finger tension and a set that stays bright for months.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Thin coating over the whole string. Blocks sweat and grime from the windings, so tone lasts far longer than uncoated.
Detail 02
Thinner than the .045-.105 most basses ship with. Less tension, easier on the hands, slightly less low-end punch.
Detail 03
Warmer and smoother under the fingers than pure stainless. Also less abrasive on frets.
Detail 04
Cut for 34" scale basses. The silk or taper must clear the nut with winding left on the post.
Detail 05
E-A-D-G only. No B string included, so it won't cover a 5-string.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. These are cut for long-scale, 34" instruments. On a short-scale bass the taper and winding land in the wrong place at the nut and saddle.
The coating keeps sweat and skin oil out of the windings, so they hold their brightness much longer than uncoated sets. How long depends on how much you play and how acidic your hands are.
For standard E tuning it's fine and easier on the hands. If you tune down to D or lower, go up a gauge instead.
If you're coming from a heavier set, yes. Lower tension pulls less on the neck, so the truss rod and intonation will likely need a small adjustment.