Detail 01
Mid switch: 9dB boost or cut at 500Hz
Provides a fixed midrange adjustment at 500Hz.
Product detailSKU #1500000260686
Electro-HarmonixNano Battalion Bass Preamp & Overdrive Bass Guitar Effects Pedal
Sale
1/9
Independent shopping perspective
The Korena take
Nano Battalion combines a bass preamp and overdrive pedal around an all-analog MOSFET drive circuit. It moves from light overdrive to fully saturated distortion, with Bass, Treble and Mid EQ controls for shaping the result. Three EQ-position modes determine whether the EQ works after distortion, before it on both clean and distorted signal, or on the dry signal alone. Its 1/4-inch output delivers unbalanced signal with TS cable or balanced signal through TRS for direct connection to a mixing console or recording interface.
Strong match
Who this is for
- Bass setups sending a balanced TRS output directly to a mixing console or recording interface.
- Increasing distortion saturation by boosting EQ before the drive circuit.
- Choosing whether EQ shapes distorted signal, both signals, or dry signal alone.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Treble and Bass EQ
Treble adjusts frequencies above 1kHz; Bass adjusts frequencies below 200Hz.
Detail 03
Three EQ-position modes
Distortion Mode affects distorted signal, Input Mode affects clean and distorted signals, and Dry Mode affects clean signal only.
Final check
Know before you order
- 01Use a normal TS cable for unbalanced output; use a TRS cable for balanced output.
- 02Both the input and output are 1/4-inch jacks.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the Nano Battalion connect directly to a mixer?
Yes. Connecting a TRS cable to its output provides a balanced signal for a mixing console or recording interface.
02What happens in Input Mode?
The EQ comes before the drive, affecting clean and distorted signals. Boosting frequencies in this mode can make the distortion more saturated.
