Detail 01
Bandwidth control
Sets whether distortion emphasis is warmer and lower-frequency or tighter and higher-frequency.
Product detailSKU #1500000482585
EarthQuaker DevicesScrolls Bass Odyssey EQ and Overdrive Pedal - Black
1/8
Independent shopping perspective
The Korena take
An all-analog bass drive and active EQ platform with clean blending, flexible routing, buffered parallel output and balanced XLR direct output.
Strong match
Who this is for
- Bassists who want drive and active EQ in one pedal
- Players using amp, direct-recording or ampless bass setups
- Pedalboards that need an effects loop between drive and EQ
Consider the trade-offs
When to look elsewhere
- Players who need a power supply included
- Players seeking a pedal without direct-output or routing features
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Variable Frequency
Targets frequencies from approximately 20 Hz to 10 kHz.
Detail 03
Deep, Process and Bright
Deep adds an 80 Hz boost, Process creates a low-mid scoop, and Bright adds a 5 kHz boost.
Detail 04
Balanced XLR direct output
Includes analog filtering to approximate a bass speaker cabinet character.
Final check
Know before you order
- 01A 9V DC center-negative power supply is required and is not included.
- 02The effects loop is hardwired between the drive and EQ sections.
- 03The Parallel Out sends an always-active buffered clean signal.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is Scrolls analog?
Yes. It is an all-analog pedal.
02Where is the effects loop placed?
It is placed between the drive and EQ stages.
03Does it have a direct output?
Yes. It has a balanced XLR direct output with analog speaker cabinet-style filtering and a ground lift.
04Can I blend clean bass with the drive sound?
Yes. The Blend control mixes clean and overdriven signal.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Variable frequency range
- Approximately 20Hz–10kHz
- Direct out impedance
- 100 ohm
4 detailsPickups & controls
- Push-button controls
- Deep, process, bright
- EQ controls
- Level, vari, vari-freq, treble, bass, middle
- Drive controls
- Level, blend, drive, bandwidth, tone
- Footswitches
- Drive, EQ
1 detailsBody & build
- Country of Origin
- United States Dimensions & Weight Dimensions (WxHxD): 4.5" (11.43 cm) x 2.25" (5.72 cm) x 4.75" (12.07 cm)
8 detailsConnections & power
- Direct output filtering
- Analog speaker cabinet-style filtering
- Parallel output
- Buffered clean signal
- Drive input impedance
- 500 kOhm
- EQ output impedance
- Less than 1 kOhm
- Parallel input impedance
- 10 MOhm
- EQ input impedance
- 10 MOhm
- Drive output impedance
- 100 ohm
- Parallel output impedance
- 100 ohm
1 detailsIn the box
- Power supply included
- ✕ Not included
22 detailsOther
- Power requirement
- 9V DC center-negative power supply
- Deep boost
- 80Hz
- Drive section
- Before EQ
- Bright boost
- 5kHz
- Artist collaboration
- Kentaro Nakao
- Tier
- new
- Output
- 1/4"
- Ground lift
- Yes
- Parallel out
- Buffered
- Category Source
- detail
- Direct out
- Balanced XLR
- Product type
- Bass EQ and overdrive pedal
- Korena Special
- false
- Switching
- Relay-based true bypass on drive side, standard on/off switching on EQ side
- Dimensions (WxHxD)
- 4.5" (11.43 cm) x 2.25" (5.72 cm) x 4.75" (12.07 cm)
- Current draw
- 70 mA
- Country of origin
- United States
- Product Type
- Bass EQ and overdrive pedal
- Model
- Scrolls Bass Odyssey
- Analog or digital
- Analog
- Source Id
- site51500000482585
- Effects loop
- Yes
Complete your setup
Worth comparing
1 of 12
More from EarthQuaker Devices
1 of 7
