Detail 01
Deep conditioner
Meant to soak into dried-out wood, not just wipe the surface. Use sparingly and infrequently.
Product detailSKU #1274228082248
DunlopFingerboard 02 Deep Conditioner
Independent shopping perspective
The Korena take
Deep conditioner for unfinished fingerboards. For guitars with dry, thirsty rosewood or ebony that need more than a routine cleaning.
Strong match
Who this is for
- Guitars stored in dry or heated rooms through winter
- Fretboards that look grey and feel chalky
- Restringing day, when the board is fully exposed
Consider the trade-offs
When to look elsewhere
- Maple boards with a gloss or satin finish
- Boards that just need dust removed rather than conditioning
- Players wanting a one-step cleaner — this conditions, not scrubs
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Fingerboard-specific
Formulated for bare wood boards. Sealed maple necks don't absorb it and don't need it.
Detail 03
Applied during restring
You need the strings off to reach the wood between frets, so plan around a string change.
Detail 04
Dunlop 02 in the system
The conditioning step. Cleaning and lemon-oil steps are separate products, sold separately.
Final check
Know before you order
- 01Strings are not included — budget a fresh set for the same session
- 02Apply thin and wipe off; excess oil can seep into fret slots
- 03Check whether your board is finished maple before using any conditioner
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this on a maple fretboard?
Only if the maple is unfinished. Most maple boards are sealed with gloss or satin, and conditioner won't penetrate the finish.
02How often should I condition my fingerboard?
Only when the wood looks dry or grey — typically once or twice a year. Over-conditioning does more harm than skipping it.
03Do I have to take the strings off?
Yes, for a proper job. You need access to the wood between and under the frets, so do it during a string change.
04Does this clean the board too?
It conditions dry wood. Heavy grime and finger gunk should come off first with a dedicated cleaning step.
