Detail 01
TS (tip-sleeve) wiring
Unbalanced, two-conductor. Fine for guitars and pedals; it collapses a balanced TRS signal to mono unbalanced.

Independent shopping perspective
Barrel adapter with a 1/4" TS plug on both ends. Joins two female 1/4" cables into one longer run, or bridges two patch points.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Unbalanced, two-conductor. Fine for guitars and pedals; it collapses a balanced TRS signal to mono unbalanced.
Detail 02
It joins two female jacks or two cable ends with female connectors. It won't mate with two male cable plugs.
Detail 03
Straight-through, so the joint sticks out in a line rather than turning a corner. Plan for clearance behind gear.
Detail 04
One signal, one ground. A stereo cable run through this comes out mono, with the right channel dropped.
Detail 05
Disappears on a dark stage floor and behind a pedalboard. It also means it's easy to lose in a dim room.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Only if both cable ends are female. Standard instrument cables have male plugs on both ends, and those need a female-to-female coupler instead.
No. It's TS mono, so a stereo signal loses one channel. Stereo needs a TRS adapter with a ring conductor.
Yes. Pedal ins and outs are 1/4" TS female jacks, so this can bridge two patch cables or connect gear sitting jack-to-jack.
A short adapter adds negligible loss on its own. What matters is total cable length after joining; long unbalanced runs roll off highs regardless of the adapter.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.