Detail 01
1/4" to 1/4"
Standard instrument jack on both ends. Works with guitar cables, patch cables, pedal inputs, and amp inputs.

Independent shopping perspective
Right-angle offset 1/4" adapter that turns a straight cable end into an angled one. For tight jack clearance on pedals and gear.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Standard instrument jack on both ends. Works with guitar cables, patch cables, pedal inputs, and amp inputs.
Detail 02
Redirects the cable sideways instead of straight out, buying back an inch or two of clearance behind the jack.
Detail 03
Adds a connection point to a cable you already own instead of replacing it.
Detail 04
Disappears on a dark pedalboard. No reflection under stage lighting.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
A right-angle cable has the bend built into the plug. This adapter adds the bend to a straight cable you already own, which is useful when you don't want to rebuy cables.
No. Speaker connections carry amplifier-level current and need speaker cable rated for it. Use this on instrument and pedal signal paths only.
It depends on the depth of the jack cup. Barrel adapters need room to seat fully. Measure your jack recess before counting on it for a Strat-style or side-mounted jack plate.
No. It passes the same unbalanced signal through. Just keep the contacts clean, since a dirty or loose joint causes crackle and dropouts.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.