Detail 01
3/4 size
Cut for a 3/4 cello's shorter scale. A 4/4 string leaves too much length and seats badly at the peg.

Independent shopping perspective
Single A string for a 3/4 cello. Replacement for the string that breaks most often on student instruments.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Cut for a 3/4 cello's shorter scale. A 4/4 string leaves too much length and seats badly at the peg.
Detail 02
Highest and thinnest of the four. It takes the most bow pressure and breaks more often than the rest.
Detail 03
Comes to pitch fast and stays there. Resists the humidity swings a case going between home and school puts it through.
Detail 04
D'Addario's student cello string. Priority is durability and tuning stability over tonal depth.
Detail 05
The other three stay as-is. A fresh A next to three worn strings will sound brighter and louder.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Usually a sharp edge in the bridge or nut groove, or a burr on the fine tuner. Smooth the groove with a pencil or fine file before fitting a new string.
It can be forced on, but the winding lands in the wrong place at the peg and nut, which hurts tuning stability and shortens string life.
Measure the back, from the top edge to the bottom, excluding the neck. A 3/4 cello runs roughly 27 to 28 inches; a 4/4 runs about 30.
No. Leave them at pitch so the bridge and soundpost stay loaded. Change one string at a time.