Detail 01
Ebony
A dense, dark hardwood. Much harder than the plastic pins most acoustics ship with, and heavier.
Product detailSKU #1274034478821
D'AddarioEbony Bridge/End Pin Set Ebony
1/4
Independent shopping perspective
The Korena take
A set of ebony bridge pins and end pin for acoustic guitar. A cosmetic and material upgrade over stock plastic pins.
Strong match
Who this is for
- Swapping out plastic pins on a mid-tier acoustic
- Matching a dark bridge, fretboard, or headstock veneer
- Replacing a pin that cracked or went missing
Consider the trade-offs
When to look elsewhere
- Electric guitars, which have no bridge pins
- Anyone expecting a large change in how the guitar sounds
- Players who want the exact factory look on a vintage instrument
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Bridge pin set plus end pin
Covers all six string pins and the strap/endpin hole in one purchase, so nothing is left mismatched.
Detail 03
Unslotted or slotted fit
Pin fit depends on whether your bridge is slotted. A mismatch means the ball end seats badly.
Detail 04
$19.99
Entry-level price for a wood pin set. Cheaper than bone or fossil ivory, dearer than plastic.
Final check
Know before you order
- 01Measure your existing pins; bridge pin taper and diameter vary between guitars
- 02Remove old pins with a proper puller, not pliers, to protect the bridge
- 03Nothing else is included, no strings and no strap button hardware
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will ebony pins change my guitar's tone?
Any change is small. Treat this as a material and appearance upgrade, not a tonal fix.
02How many pins are in the set?
It covers a six-string acoustic's bridge pins plus the end pin.
03Will they fit my guitar?
Bridge pin holes are not standardized. Check your current pin's diameter and taper first; some guitars need light reaming.
04Do I need tools to install them?
A bridge pin puller is strongly recommended. Prying with pliers or a screwdriver chips the bridge.