Detail 01
ABS plastic
Hard and dimensionally stable. Will not swell with humidity like wood, and costs a fraction of bone.
Product detailSKU #1274034478392
D'AddarioABS Bridge/End Pin Set Ivory
1/4
Independent shopping perspective
The Korena take
Set of ABS bridge pins and end pin in ivory-look plastic. A cheap replacement for acoustic guitar pins that are cracked, lost, or mismatched.
Strong match
Who this is for
- Replacing a cracked or missing bridge pin on an acoustic
- Matching a full set after losing one during a string change
- Keeping a spare set in the case for gigs
Consider the trade-offs
When to look elsewhere
- Players chasing tone changes from bone or brass pins
- Guitars with slotted bridges that need slotted pins
- Anyone whose bridge holes are worn oversized
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Ivory color
Matches the stock pins on most natural and sunburst acoustics without looking like an aftermarket part.
Detail 03
Includes an end pin
The strap button at the tail block is covered too, so a full pin set stays visually consistent.
Detail 04
Unslotted pin body
The ball end seats against the bridge plate and the string runs alongside the pin, the standard setup on most acoustics.
Final check
Know before you order
- 01Pin taper varies by builder; a loose pin pops up under string tension
- 02No pin puller included, and prying with pliers dents the bridge
- 03Seat pins by hand, not by hammering, or you risk cracking the bridge
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many pins are in the set?
A full bridge pin set for a six-string plus the end pin. Confirm the count if your guitar is a twelve-string, which needs twice the bridge pins.
02Will these change my tone?
Not meaningfully. Plastic pins are what most factory acoustics ship with. Bone or brass pins are the upgrade path if you want a change.
03Will they fit my guitar?
They fit standard acoustic bridge holes, but taper and diameter vary between builders. A pin that sits too high or too low means the taper is off.
04Can I use them on a slotted bridge?
No. Slotted bridges need pins with a channel cut for the string. These are unslotted, meant for bridges where the hole itself is slotted.