Detail 01
Half-stack sizing
Built to cover a head-and-cabinet stack. In front of a combo it is oversized and harder to place cleanly.
Product detailSKU #1312645312963
Control AcousticsVDS3X3 Half Stack Sound Barrier Shield
1/4
Independent shopping perspective
The Korena take
A barrier that stands in front of a half stack to keep direct cabinet sound off the stage and out of the room. Volume control, not soundproofing.
Strong match
Who this is for
- Loud guitar rigs on small stages with close front rows
- Churches and venues where cab volume overwhelms the mix
- Cutting cabinet bleed into nearby vocal mics
Consider the trade-offs
When to look elsewhere
- Home practice — turning the amp down costs nothing
- Anyone expecting real soundproofing; barriers deflect, they don't absorb
- Combos and small cabs; this is sized for half stacks
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Open shield, not an enclosure
Sound still travels over the top and around the sides. Expect the direct beam knocked down, not silence.
Detail 03
Sits in front of the cab
Redirects the on-axis beam away from the front row and floor mics. What you hear onstage shifts too.
Detail 04
Passive volume control
You keep the amp at the setting it sounds best at and cut what reaches the room, instead of playing quieter than the rig likes.
Detail 05
$199.99
Cheaper than an isolation cabinet and fully reversible. You keep the same rig and only change where it points.
Final check
Know before you order
- 01Needs floor space directly in front of the cab — check stage depth
- 02Shield only; no mics, stands or absorption panels included
- 03Sound still escapes over the top and around the sides
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this soundproof my amp?
No. It blocks the direct beam off the speakers. Sound still travels over it, around it and through the floor. Volume drops in front, not everywhere.
02Will it change my tone?
The amp itself is unchanged. What reaches your ears and the room changes, since the direct path and reflections shift. A close mic behind the shield is unaffected.
03Can I use it with a combo amp?
You can, but it's sized for a half stack, so a combo sits well below the top. It still blocks — you're just paying for unused coverage.
04Do I still need to mic the cab?
Yes, if you were micing before. The shield reduces spill into other mics; it does not replace close-micing your speaker for the PA.
