Detail 01
Sound barrier shield, not an isolation cabinet
It absorbs and blocks part of the output. Bass frequencies still pass through walls and floors.
Product detailSKU #1312645312983
Control AcousticsVDS2X4 Combo Amp Sound Barrier Shield
1/4
Independent shopping perspective
The Korena take
A padded shield that sits around a combo amp to cut how much sound escapes into the room. For recording or playing loud in shared spaces.
Strong match
Who this is for
- Miking a cranked combo without the room mic hearing everything
- Apartment or condo players who need volume without full bleed
- Tracking guitar in the same room as other musicians
Consider the trade-offs
When to look elsewhere
- Anyone wanting true silence — this reduces, it does not soundproof
- Players with a head-and-cab rig rather than a combo
- Very large combos that may not fit inside the shield
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Wraps around the amp rather than sealing it
The speaker still breathes, so the amp's tone and feel stay closer to normal than in a sealed box.
Detail 03
Designed around combo amp dimensions
Measure your amp's width, height and depth before ordering. A 2x12 combo needs more room than a 1x10.
Detail 04
Portable panel construction
Can be set up for a session and stored after, unlike a built-in wall treatment.
Detail 05
Sits in front of and around the speaker
Changes what you hear at the player position. You may want a monitor or headphone feed while tracking.
Final check
Know before you order
- 01Measure your combo first — height, width, depth, and handle clearance
- 02No microphone, stand, or cable included
- 03Amps run warmer when enclosed; leave ventilation and don't drape anything over vents
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this make my amp silent?
No. It reduces how much sound reaches the room and nearby mics, but it is not soundproofing. Low frequencies especially still travel through the floor and walls.
02Can I still mic the amp with this?
Yes. The point is to isolate the close mic from the room, so the mic picks up more amp and less reflection and bleed.
03Does it change my tone?
The sound at your ears changes because reflections are absorbed. The amp itself is unchanged, though the mic will hear a drier, tighter signal.
04Will it fit a 2x12 combo?
Check your amp's exact dimensions against the shield's before buying. Larger combos are the most common fit problem.
