Detail 01
Phono and line RCA inputs
Turntables plug straight in — the preamp is built in. No separate phono stage needed.

Independent shopping perspective
A compact two-channel DJ mixer with phono inputs and USB audio. For bedroom setups, small parties, and digitizing records.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Turntables plug straight in — the preamp is built in. No separate phono stage needed.
Detail 02
Fine for recording sets and archiving vinyl. Below the 24-bit standard for release-quality mastering.
Detail 03
The bass and treble knobs cut deep enough to nearly kill a frequency band, which is what blending mixes needs.
Detail 04
A 1/4" jack, not XLR. Most stage mics need an adapter, and 53dB suits dynamic mics for announcements.
Detail 05
Keep cable runs short. Long unbalanced runs to a distant PA pick up hum and noise.
Detail 06
Small enough to sit between two turntables and light enough to carry with the rest of your gear.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes. It has dedicated phono inputs with the preamp built in, so a turntable's low-level signal comes up to line level inside the mixer.
The USB connection carries stereo audio in and out at 16-bit/48kHz, so your computer sees it as an audio interface for recording or playback.
It outputs a line-level signal on unbalanced RCA. That feeds powered speakers or an amp fine, but keep the cable run short to avoid noise.
The headphone out delivers around 125mW, which handles typical DJ headphones. Very high-impedance studio cans will be quieter.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.