Detail 01
48V phantom power
Allows use of professional condenser microphones for vocals and acoustic instruments.
Product detailSKU #1500000421026
BehringerXENYX 1003B 10-Channel Analog Mixer
1/4
Independent shopping perspective
The Korena take
Built for compact mixing setups that may need to move, the XENYX 1003B handles up to 10 sources and can run from standard 9V batteries when battery operation is needed. Five XLR mic inputs, line inputs, a stereo line source, and RCA and 1/4-inch outputs cover the connections described here. Hands-on faders, channel EQ, aux send, and pre-fader monitoring keep level and routing adjustments directly accessible.
Strong match
Who this is for
- Remote podcast recording or small performances where optional 9V battery operation is useful.
- Mixing several microphones, line-level sources, and one stereo source from one compact console.
- Sending a post-fader signal to external effects while monitoring a pre-fader mix.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
3-band channel EQ
Each channel has low, mid, and high controls for shaping its signal.
Detail 03
60 mm channel faders
Provides dedicated physical level control for each channel.
Detail 04
Frequency response at 60 dB gain: 20 Hz–60 kHz
States the mixer’s specified response range at that gain setting.
Final check
Know before you order
- 01Battery operation uses standard 9V batteries.
- 02External effects connect through the post-fader aux send.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the XENYX 1003B run away from mains power?
Yes. It supports optional operation with standard 9V batteries.
02How many sources can it mix and record?
It can mix and record up to 10 sources.
03Does it support condenser microphones?
Yes. It provides 48V phantom power for professional condenser microphones.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Response Gain 60db 3db
- 20Hz–60kHz
- Impedance
- 18 kohm balanced
- Frequency Response Gain 15db 3db
- 10Hz–80kHz
5 detailsConnections & power
- Input Impedance
- 1.8 kohm balanced
- Line Input
- 1/4 inch TRS connector unbalanced
- Max Input Level
- +20dBu @ Gain 12O'clock
- Microphone Input
- Balanced XLR, discrete input circuit
- Mono Line Inputs
- 1/4 inch TRS connector balanced
6 detailsOther
- Distortion Thd N Gain 15db
- 0.006 % @ 1kHz -5dBu
- Mid
- 2.5kHz/±15dB
- Gain Range
- -∞ to +15dB
- High
- 12kHz/±15dB
- Low
- 80Hz/±15dB
- Mic Ein 22hz 22khz 50 Ohm Source
- Typ. -128dB A-weighted
