Detail 01
Per-channel 8 kHz high-cut filter
Lets each channel apply the specified high-frequency cut independently.
Product detailSKU #1500000421010
BehringerULTRA-DI PRO DI4000 V2 4-Channel Active Direct Box
1/5
Independent shopping perspective
The Korena take
Built for a rack that needs four active DI paths without giving up individual control. Each channel accepts XLR or 1/4-inch TS input, sends a balanced XLR feed onward, and provides a 1/4-inch link output for an amp or monitor console. Per-channel ground lift, phase reverse, high-cut filtering, gain, and attenuation make it practical when sources need different handling. The internal 100–240 V supply also suits changing mains power between venues.
Strong match
Who this is for
- Routing four guitars, basses, keyboards, or line-level sources from one rack space.
- Splitting each input between a balanced XLR feed and a linked amp or monitor connection.
- Handling speaker outputs with input attenuation, where the stated 3,000 W connection rating applies.
Consider the trade-offs
When to look elsewhere
- Setups requiring more than four independent DI channels in one unit.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Per-channel ground lift and phase reverse
Provides channel-by-channel tools for hum issues and signal-polarity adjustment.
Detail 03
Up to +20 dB gain
Adds available level for weaker instrument signals.
Detail 04
100–240 V switch-mode power supply
Automatically adapts across the stated mains-voltage range.
Final check
Know before you order
- 01Allow one rack space: the unit measures 19 x 5.4 x 1.7 inches.
- 02It uses a standard IEC AC cable.
- 03Speaker-output connection is specified for outputs up to 3,000 W.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many sources can the DI4000 V2 handle?
It provides four independent active DI channels.
02Can each channel feed an amplifier as well as XLR?
Yes. Each channel has a balanced XLR output and a 1/4-inch link output for an amp or monitor console.
03Does it have hum-control switches?
Yes. Ground lift switches are provided on each channel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- EQ
- High-cut Filter
1 detailsPickups & controls
- Polarity Switch
- Yes
1 detailsBody & build
- Type
- Active
3 detailsConnections & power
- Outputs
- 4 x XLR, 4 x 1/4 inch (link)
- Inputs
- 4 x XLR, 4 x 1/4 inch TS
- Power Source
- Standard IEC AC cable
4 detailsSize & weight
- Weight
- 4.6
- Depth
- 5.4 inch
- Width
- 19 inch
- Height
- 1.7 inch
3 detailsOther
- Ground Lift
- Yes
- Channels
- 4
- Pads
- -20dB
