Detail 01
Sealed-box design
Keeps the cabinet compact and shallow for center-channel placement in a multi-monitor array.
Product detailSKU #1500000454294
Barefoot SoundFootprint03C 3-Way Center Channel Active Studio Monitor (Each)
1/6
Independent shopping perspective
The Korena take
Built for the center position in a Footprint03 multi-monitor system, the Footprint03C is an active three-way monitor with a sealed cabinet and a forward-facing driver array: two 6.5-inch woofers, a 3.5-inch midrange, and a 1-inch ring-radiator tweeter. It is intended to maintain tonal consistency with Footprint03 left and right monitors, giving film and music mixers a dedicated point for assessing vocals, lead instruments, and other central material. MEME voice selection and stepped input-level control support monitoring adjustments.
Strong match
Who this is for
- Surround or immersive mix rooms using Footprint03 monitors for the left and right channels.
- Balancing vocals, lead instruments, and other center-focused material in film or music sessions.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
42Hz–40kHz frequency response (±3dB)
States the monitor's specified response range under its ±3dB measurement.
Detail 03
104.5dB continuous maximum SPL
States its continuous maximum sound-pressure-level specification.
Detail 04
400Hz and 3900Hz active crossover frequencies
The active crossover divides the signal between the drivers at these two points.
Detail 05
Input-level stepped attenuator and MEME voice select
Provides stepped level adjustment and access to MEME voice settings.
Detail 06
33 lb. each
Important to account for when planning a mounting solution or positioning the monitor.
Final check
Know before you order
- 01It is designed as the center-channel complement to Footprint03 left and right monitors.
- 02Plan support or mounting for a 33 lb. monitor.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the Footprint03C intended to pair with Footprint03 monitors?
Yes. It is designed as their center-channel complement in a multi-monitor system.
02What drivers does it use?
It has a 1-inch ring-radiator tweeter, a 3.5-inch aluminum-cone midrange driver, and two forward-facing 6.5-inch aluminum-cone woofers.
03What monitoring controls are available?
The monitor has an input-level stepped attenuator and MEME voice-select controls.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Max SPL
- Continuous 104.5dB
- Frequency Response
- 42Hz–40kHz (+/-3dB), 48Hz–22kHz (+/-1dB)
- Speaker
- 33 lb. (15 kg) each
1 detailsPickups & controls
- Controls
- Input level stepped attenuator, MEME voice select
5 detailsConnections & power
- Input Impedance
- 20 kohms
- Mains Voltage Input
- 85 VAC to 265 VAC universal
- Input Sensitivity 1m
- 90dB @ -15dBV (pass band)
- Maximum Power Consumption
- 340W
- Idle Power Consumption
- 12W
2 detailsSize & weight
- Word Length
- 28-bit (56-bit High Precision)
- Dimensions
- 20 inch x 7.25 inch x 9 inch (50.8 x 18.4 x 22.9 mm)
13 detailsOther
- Signal Noise
- ≥100dB
- Mf Amplifier
- 100W
- Hf Amplifier
- 60W
- Woofers
- 6.5 inch aluminum cone with low distortion motor, +/- 9.5 mm linear excursion, Amplifier: 100W
- TRS Male Tip
- positive, Ring: negative, Sleeve: ground)
- Bass Response
- -3dB @ 42Hz, Q = 0.707, Slope = 24dB/octave asymptotic
- Crossover Frequencies
- 400/3900Hz (active crossover between drivers)
- Lf Amplifier
- 100W
- Midrange
- 3.5 inch aluminum cone, low distortion motor, +/- 3.5 mm linear excursion, Amplifier: 100W
- Internal Volume
- 10.8 liters
- Shipping
- 40.3 lb. (18.3 kg) each
- Sample Rate
- 96kHz
- Tweeter
- 1 inch ring radiator, low distortion motor, rear waveguide chamber, Amplifier: 60W
