Detail 01
RJ45 Dante connection
Receives Dante network audio through an RJ45 connector.
Product detailSKU #1500000330019
Fostex6301DT 4" Powered Studio Monitor with DANTE (Each)
1/3
Independent shopping perspective
The Korena take
Fostex’s 6301DT is a compact powered monitor for Dante network audio, able to play back two Dante channels through its 4-inch full-range driver and closed enclosure. Its RJ45 Dante connection makes it suited to networked broadcast and production monitoring positions. The monitor measures 4.72 by 7.44 by 4.72 inches, weighs 5 pounds, and uses a 20W amplifier. When input remains below threshold, auto standby engages after roughly 25 minutes.
Strong match
Who this is for
- Broadcast and production monitoring locations that need playback from two Dante network-audio channels.
- Compact monitoring positions where a 4-inch powered, closed-enclosure speaker suits the available space.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
20W rated output
The built-in amplifier is rated at 20 watts.
Detail 03
Auto standby after approximately 25 minutes
Standby activates after continuous input below the threshold for about 25 minutes.
Detail 04
70Hz–15kHz frequency response
States the monitor’s specified frequency-response range.
Final check
Know before you order
- 01Plan for a Dante network-audio connection through the RJ45 input.
- 02The product is sold individually.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many Dante channels can it play back?
It can play back any two channels of Dante network audio signals.
02Does it enter standby automatically?
Yes. Auto standby becomes active after approximately 25 minutes of continuous input below the threshold level.
03What are its dimensions?
It measures 4.72 inches wide, 7.44 inches high, and 4.72 inches deep.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 70Hz–15kHz
1 detailsBody & build
- Color
- Red
9 detailsConnections & power
- Input Impedance
- 110 ohm or more
- Power Consumption
- 10W (less than 0.5W in stand-by mode)
- 6301nd Connector
- XLR-3-32 (IEC 60958 AES/EBU)
- 6301ne Connector
- XLR-3-31 (electrically balanced)
- Input Sensitivity
- 1/4” TS phone: -14dBV (0.2Vr.m.s.)
- Power Requirement
- AC 100 – 240V (50/60Hz)
- 6301dt Connector
- RJ45 (Dante)
- Rated Output
- 20W
- 6301nx Connector
- XLR-3-31 (transformer balanced)
3 detailsSize & weight
- Dimensions Wxhxd
- 4.72 inch x 7.44 inch x 4.72 inch
- Weight Nb Ne Nd
- 4.85 lb.
- Weight Nx Dt
- 5 lb.
1 detailsIn the box
- Auto Stand By
- active after approx. 25 min. of continuous input lower than the threshold level
9 detailsOther
- All Models
- Connector: 1/4” TS Phone (unbalanced)
- XLR Digital
- -12dBFS
- Enclosure Type
- closed
- Distortion T H D
- 0.05% (1kHz / 1W output)
- Sound Pressure Level
- 85dB / W (1m)
- Maximum SPL
- 98dB
- Unit
- 4” full range
- Residual Noise
- -70dBV or less (NB/NE/NX). -65dBV (DT)
- XLR
- +4dBu (1.2Vr.m.s.)
