Detail 01
20 milliohms maximum contact resistance
Sets the stated maximum contact-resistance value.
Product detailSKU #1500000458228
AxLabs3-Way Toggle Switch 4-pole Nickel
Independent shopping perspective
The Korena take
The nickel AxLabs 3-way, 4-pole toggle switch is intended for electric-guitar electronics and other audio-equipment projects. A steel tin-plated frame, zinc die-cast bushing, and brass nickel-plated shaft make up its hardware, with Bakelite insulation and nickel-silver contacts in the switch construction. An ABS knob handles operation. It carries a 20 milliohms maximum contact-resistance specification and is rated for 3A, 300W maximum on non-inductive AC loads.
Strong match
Who this is for
- Replacing or building a three-way, four-pole switching section in an electric-guitar electronics project.
- Audio-equipment projects requiring a switch with a 3A, 300W maximum non-inductive AC contact rating.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
250VDC dielectric strength
The switch is specified with 250VDC dielectric strength.
Detail 03
1000 megaohms or greater leakage resistance
The listed leakage-resistance figure is 1000 megaohms or higher.
Detail 04
RoHS compliant
Meets the listed RoHS product standard.
Final check
Know before you order
- 01Confirm that your project calls for a 3-way, 4-pole toggle switch.
- 02Confirm the circuit stays within the stated 3A, 300W maximum non-inductive AC contact rating.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What finish is this toggle switch?
It is nickel.
02What kind of switch is it?
It is a 3-way, 4-pole toggle switch.
03What is the contact rating?
The stated rating is 3A and 300W maximum for a non-inductive AC load.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsIn the box
- Product Standard
- RoHS compliant
11 detailsOther
- Knob
- ABS
- Bushing
- Zinc diecast
- Screws
- Steel nickel plated
- Leakage Resistance
- 1000 megaohms or greater
- Contact Resistance
- 20 milliohms max
- Contacts
- Nickel silver
- Dielectric Strength
- 250VDC
- Insulation
- Bakelite
- Frame
- Steel tin plated
- Shaft
- Brass nickel plated
- Contact Rating
- 3A 300W max AC non-inductive load
