Korena
Product detailSKU #1500000251182

Audio-TechnicaATM510 VOCAL PACK - 3 PIECE

Audio-Technica logo
Audio-Technica ATM510 VOCAL PACK - 3 PIECE

Independent shopping perspective

The Korena take

Three ATM510 dynamic vocal microphones in one pack for shared stages, rehearsal rooms, or keeping spares on hand. Their cardioid pattern concentrates pickup at the front while reducing sound arriving from the sides and rear, helping separate vocals from nearby sources and limit feedback. Internal shock mounting reduces handling and stage noise, while the multi-stage grille and windscreen address plosives, sibilance-related distortion, and wind noise. Each mic uses a 3-pin XLRM-type output.

Audio-Technica ATM510 VOCAL PACK - 3 PIECE product detail
Product studyAudio-Technica ATM510 VOCAL PACK - 3 PIECE

Strong match

Who this is for

  • Outfitting a rehearsal space or stage with three matching cardioid vocal microphones.
  • Vocal setups where reduced side and rear pickup helps isolate the singer.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Cardioid polar pattern

Reduces pickup from the sides and rear to help isolate the vocal source and minimize feedback.

Detail 02

Internal shock mounting

Reduces handling and stage noise during use.

Detail 03

AT8470 Quiet-Flex clamp, thread adapter, and pouch

Provides a stand-mounting option for 5/8-inch–27 threaded stands, adaptation to 3/8-inch–16 threads, and soft protection for transport.

Final check

Know before you order

  1. 01The included clamp mounts to 5/8-inch–27 threaded microphone stands; a 5/8-inch–27 to 3/8-inch–16 adapter is also included.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01How many microphones are in the pack?

The pack contains three ATM510 microphones.

02What connector does the ATM510 use?

Each microphone has an integral 3-pin XLRM-type output connector.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Polar Pattern
Cardioid
Frequency Response
90Hz-16kHz
Impedance
300 ohms
1 detailsPickups & controls
Open Circuit Sensitivity
-55 dB (1.7 mV) re 1V at 1 Pa
1 detailsBody & build
Color
3 PIECE
1 detailsConnections & power
Output Connector
Integral 3-pin XLRM-type
2 detailsSize & weight
Weight
0.57
Dimensions
6-11/16 inch (170mm) long; 2-1/8 inch (53.7mm) diameter
1 detailsIn the box
Audio Technica Case Style
T6
2 detailsOther
Accessories
AT8470 Quiet-Flex stand clamp for 5/8 inch-27 threaded stands; 5/8 inch-27 to 3/8 inch-16 threaded adapter; soft protective pouch
Element
Dynamic

Complete your setup

Worth comparing

More from Audio-Technica