Detail 01
Resonant head
This goes on the front of the kick. It is not the head your beater hits.
Product detailSKU #1274115040093
AquarianForce II Resonant Bass Drum Head Black 22 in.
1/2
Independent shopping perspective
The Korena take
22-inch black resonant head for the front of a bass drum, for drummers replacing a worn or ported front head on a standard kick.
Strong match
Who this is for
- Rebuilding a 22-inch kick with a fresh front head
- Players who want a dark front head look on stage
- Replacing a front head that has been ported badly
Consider the trade-offs
When to look elsewhere
- Anyone needing the batter head you actually strike
- Kicks that are 20, 24 or any size other than 22
- Drummers who want a pre-cut port hole ready to mic
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
22 inch
Fits a 22-inch bass drum shell only. Measure the shell diameter before ordering.
Detail 03
Black film
Cosmetic on stage, and it hides the inside of the drum better than a white head under lights.
Detail 04
Force II construction
Two-ply build on the front head. Controls sustain and gives a shorter, tighter kick note.
Detail 05
No port hole
It arrives solid. Cutting a mic port is a one-way modification you do yourself.
Final check
Know before you order
- 01Front head only — batter head, muffling pillow and port ring are separate
- 02Cutting a port for a mic is permanent; measure and use a proper cutter
- 03Tune the front head low and even, then adjust for the amount of ring you want
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this the head I hit with the pedal?
No. This is the resonant front head. The batter head is a different head made for beater impact.
02Does it come with a hole for a microphone?
No, it comes solid. You cut the port yourself, usually off-center and around four to five inches across.
03Can I use it without cutting a port?
Yes. A solid front head gives more resonance and low end, but you will have to mic the kick from the front outside.
04Will it fit a 22-inch bass drum from any brand?
Yes. Bass drum sizing is standard, so a 22-inch head fits a 22-inch shell regardless of who made the kit.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
