Detail 01
Clear, not tinted
Won't change the color underneath. Use amber or vintage tint separately if you want a yellowed look.
Product detailSKU #1274319727394
Allied Music SupplyA2105-C / A2105-G Lacquer Spray Clear, 12 oz.
Sale
Independent shopping perspective
The Korena take
Clear lacquer spray in a 12 oz aerosol, for topcoating fresh color work or reviving a worn finish. Repair and refinish use.
Strong match
Who this is for
- Clear coating over a fresh color or stain job
- Building gloss on a small repair before buffing out
- Sealing bare wood on a shop project without spray equipment
Consider the trade-offs
When to look elsewhere
- Refinishing over polyurethane or catalyzed factory finishes
- Anyone needing a fast one-coat job with no cure time
- Cold or humid garages where lacquer blushes and hazes
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Lacquer chemistry
Each coat softens the one below and fuses, so coats build as one film and can be spot-repaired.
Detail 03
12 oz aerosol can
Several light coats over a small area. Full-body gloss buildup takes more than one can.
Detail 04
Aerosol, no gun required
Skip the compressor, but the spray pattern is fixed and you get less control over film thickness.
Final check
Know before you order
- 01Build gloss with many light coats, not few heavy ones, or it runs
- 02Lacquer needs weeks of cure before wet sanding and buffing to full gloss
- 03High humidity causes blushing, a milky haze in the fresh film
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How long before I can buff it?
Lacquer feels dry in hours but keeps shrinking for weeks. Buffing too early leaves sink marks in the grain. Wait before final sanding and polishing.
02Will this work over my guitar's factory finish?
Only if that finish is lacquer. Over polyurethane or catalyzed finishes it may not bond and can wrinkle. Test in a hidden area.
03Why did my finish turn cloudy?
Blushing from moisture trapped in the film. Happens in humid or cold conditions. Spray warmer and drier, or use a retarder.
04Can I use it over stain or dye?
Yes, over dry, solvent-compatible stain. Mist the first coats lightly so the spray doesn't disturb pigment underneath.
