Detail 01
24-bit/48 kHz audio
This is the stated digital audio resolution for the monitoring signal.
Product detailSKU #1500000311292
XviveU4R2 In-Ear Monitor Wireless System With One Transmitter & Two Receivers
1/3
Independent shopping perspective
The Korena take
U4R2 combines one transmitter with two beltpack receivers for a two-receiver wireless monitoring setup. Connect the transmitter to a mixer or sound interface, then connect earphones or headphones at each receiver. The system is specified for 24-bit/48 kHz audio, a 20 Hz–20 kHz response, and a 107 dB signal-to-noise ratio. Its rechargeable transmitter and receivers are rated for five hours, while extra receivers can be added separately for a larger shared group.
Strong match
Who this is for
- Rehearsals or gigs where two performers need wireless access to one transmitter’s monitor mix.
- Recording setups where performers need to move while monitoring through earphones or headphones.
Consider the trade-offs
When to look elsewhere
- Providing separate monitor mixes to the two included receivers from one transmitter; there is one mix per transmitter.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
107 dB signal-to-noise ratio
The system’s specified signal-to-noise ratio is 107 dB.
Detail 03
Five-hour internal battery life
Both the transmitter and receiver batteries are rated for five hours of use.
Final check
Know before you order
- 01Connect the transmitter to a mixer or sound interface.
- 02Connect earphones or headphones to the beltpack receivers.
- 03Charging takes 1.5 to 2.5 hours depending on charger current and uses a standard 5V USB charger.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many receivers come with the U4R2?
Two beltpack receivers are included with one transmitter.
02Can I add receivers later?
Yes. Extra receivers can be added separately to extend the system to more users.
03How long does charging take?
Charging is stated as taking 1.5 to 2.5 hours, depending on the charger’s current.
