Detail 01
Relay-based switching with no electronics in the signal path
Audio routing is performed through the relay matrix without electronics in the signal path.
Product detailSKU #1500000465690
Wolff AudioProPatch 128R Patchbay
1/2
Independent shopping perspective
The Korena take
ProPatch 128R is a relay-based, software-controlled patchbay for high-density studio routing. Its 64 x 64 I/O grid supplies 128 patch points with a fully balanced internal signal path and no electronics in that path. It handles mic, line, control voltage, MIDI and timecode, and it passes 48V phantom power. Wolff Hound on Mac, Windows or iPadOS is used to build, save and recall routing presets, including AB blocks, inserts, processors, mults and mono-to-stereo chains. Stored configurations auto-load at power-up.
Strong match
Who this is for
- Recalling complex routing configurations between recording, comparison and processing sessions.
- Routing balanced mic, line, control-voltage, MIDI and timecode signals in one 64 x 64 grid.
- Creating software-managed AB blocks, inserts, mults and mono-to-stereo routing chains.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
64 x 64 I/O and 128 patch points
The patchbay provides a 64-by-64 routing grid with 128 patch points.
Detail 03
48V phantom-power pass-through
The unit is specified to pass 48V phantom power.
Detail 04
Non-volatile configuration memory
Saved routing configuration auto-loads when the unit powers up.
Final check
Know before you order
- 01Plan to use Wolff Hound on Windows, Mac or iPadOS for network-connected routing configuration.
- 02The patchbay uses USB-C power.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What signal types can ProPatch 128R route?
It supports mic, line, control voltage, MIDI and timecode signals.
02Can it pass phantom power?
Yes. It is specified to pass 48V phantom power.
03Can routing presets be recalled after power-up?
Yes. Its non-volatile memory auto-loads the saved configuration on power-up.
04Which platforms run Wolff Hound?
Wolff Hound is listed for Windows, Mac and iPadOS.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- DC to limit of test equipment
3 detailsPickups & controls
- Electronics in Signal Path
- No
- Switching Mechanism
- Relay-based
- Control App Compatibility
- Windows, Mac, iPad OS
4 detailsConnections & power
- Phantom Power
- Passes 48V phantom power
- Input Output Configuration
- 64 x 64 I/O
- Power Supply
- USB-C
- Signal Types Supported
- Mic, line, control voltage, MIDI, timecode
9 detailsOther
- Configuration
- 64 x 64 I/O
- Routing Presets
- Configurable for instant recall
- Patch Points
- 128
- Internal Signal Path
- 100% balanced
- Signal Chain Features
- AB blocks, mono to stereo, mults, inserts, processors
- Noise
- 0% (DC to limit of test equipment)
- Utility App
- Wolff Hound for network connection
- Distortion
- 0% (DC to limit of test equipment)
- Configuration Memory
- Non-volatile; auto-loads on power-up
