Detail 01
Dual circuits with three modes per side
Each circuit can be set to Boost, Overdrive, or Distortion and used separately or stacked.
Product detailSKU #1500000465643
Warm AudioWA-TOT Throne of Tone Dual-Sided British-Amp-Inspired Overdrive Effects Pedal - Black and Blue
aggressivehigh outputwarmmetalrockhard rock
1/3
Independent shopping perspective
The Korena take
WA-TOT puts two British-amp-inspired overdrive circuits in one fully analog pedal, allowing either side to work independently or both to be stacked. Each side has its own volume, gain, tone, presence, voicing, drive-mode, and gain-level controls, with Boost, Overdrive, and Distortion available per side. The onboard send/return loop can place effects between the circuits, while the global FX order swap changes their sequence. A switchable 9V/18V voltage setting adds another setup choice without requiring hidden controls.
Strong match
Who this is for
- Building separate rhythm and lead drive settings within one pedalboard space.
- Placing another effect between two overdrive circuits through the send/return loop.
- Changing circuit order or voltage settings to explore alternate drive routing.
Consider the trade-offs
When to look elsewhere
- Setups without a 9V DC center-negative power supply, as one is required and not included.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
9V/18V external switch
The rear-mounted voltage doubler changes operation between 9V and 18V; listed power consumption is 24 mA at 9V and 43 mA at 18V.
Detail 03
Send/return loop and FX order swap
Lets you patch an effect between the two circuits and choose their order.
Detail 04
Per-side presence control
Each presence knob addresses the 500 Hz–2.3 kHz range.
Final check
Know before you order
- 01Use a 9V DC, center-negative power supply; it is not included.
- 02The pedal measures 6.75 × 5 × 2.63 inches.
- 03It uses 1/4-inch mono input, output, send, and return connections.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the two overdrives be used separately?
Yes. The two circuits can operate independently or be stacked.
02What drive modes are available?
Each side offers Boost, Overdrive, and Distortion.
03Can I place another pedal between the two circuits?
Yes. The WA-TOT has one 1/4-inch send and one 1/4-inch return for that routing.
04Is a power supply included?
No. It requires a 9V DC center-negative supply, which is not included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Circuit
- 100% analog, amp-inspired
2 detailsBody & build
- Color
- Black
- Per Side
- Volume, gain, tone, presence, voicing select, drive mode select, gain level select, on/off
8 detailsConnections & power
- Outputs
- 1 x 1/4 inch mono (unbalanced)
- Input Impedance
- 1 megaohm
- Inputs
- 1 x 1/4 inch mono (unbalanced)
- Voltage Support
- 9V–18V external switchable
- Power Consumption
- 24 mA (9V), 43 mA (18V)
- Maximum Output Level
- +7.1 dBu (9V), +14.6 dBu (18V)
- Power Supply
- 9V DC center-negative (not included)
- Power Input
- 9V DC center-negative barrel
3 detailsSize & weight
- Dimensions Wxhxd
- 6.75 inch x 5 inch x 2.63 inch
- Weight
- 2.4
- Dimensions W H D
- 6.75 inch × 5 inch × 2.63 inch
9 detailsOther
- Components
- JRC4580 and TL072 op-amps, 24 diodes, voltage doubler
- Voicing Modes
- Dual classic British amp-inspired circuits
- Global
- Voltage boost switch, FX order swap
- Chassis
- Rugged metal enclosure
- Bypass
- True bypass (including FX send/return loop)
- Product Type
- Dual overdrive pedal
- Drive Modes
- Boost, Overdrive, Distortion (per side)
- Send Return Loop
- 1 x 1/4 inch send, 1 x 1/4 inch return
- Design Origin
- Hand-tested in Austin, TX
