Detail 01
Gouged
The inner side is already machined to thickness, so you skip the gouging step and the machine it needs.

Independent shopping perspective
Ten pieces of gouged and shaped medium oboe cane. For players who tie and scrape their own reeds. These are not finished, playable reeds.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
The inner side is already machined to thickness, so you skip the gouging step and the machine it needs.
Detail 02
The outline is already cut to profile. Fold, tie onto a staple, and go straight to scraping.
Detail 03
Middle density. Forgiving to scrape and stable in pitch — the usual default when you don't know what a piece will do.
Detail 04
Ten reed attempts at best. Cracks, off-center ties, and over-scraping will cost you some of them.
Detail 05
Response shifts with humidity and each piece behaves a little differently. Soak before working and rotate finished reeds.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. This is cane. You still fold it, tie it onto a staple, and scrape it into a working reed.
Gouged means the inside is already thinned to thickness. Shaped means the outline is already cut. Both machine steps are done, leaving you the tying and scraping.
Medium is the common starting point — soft enough to scrape without collapsing, firm enough to hold up under pressure.
Ten at most, one per piece. Plan on losing several early on to cracks, uneven ties, or scraping too far.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.