Detail 01
6.41–15.98-inch clamping width without divider
Sets the adjustable width available for one undivided device section.
Product detailSKU #1500000241540
Ultimate SupportMDS-100 Modular Desktop Device Stand
1/6
Independent shopping perspective
The Korena take
The MDS-100 is a steel modular desktop stand for holding synths, effects pedals, and control surfaces in a configurable desk setup. Adjust the clamping width to suit one device, or use the divider to create two smaller sections. An additional MDS-100 and expander can turn it into a two-tier arrangement, giving a changing studio or performance workspace a more organized platform without committing to one layout.
Strong match
Who this is for
- Desktop studios arranging synths, effects pedals, or control surfaces in adjustable clamping sections.
- Workspaces that need to divide two smaller devices across one stand.
- Evolving setups that may add another MDS-100 and expander for two tiers.
Consider the trade-offs
When to look elsewhere
- Single-device setups wider than the 15.98-inch maximum clamping width without the divider.
- Divided setups requiring either clamping section to exceed 7.62 inches.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2.84–7.62-inch clamping width with divider on each side
Defines the adjustment range for each section when the divider is used.
Detail 03
2.8 weight
A useful figure when moving the stand between workspaces.
Final check
Know before you order
- 01Measure the device width before choosing divided or undivided use.
- 02A two-tier setup requires an additional unit and expander.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What can the MDS-100 hold?
It is designed to secure synths, effects pedals, or control surfaces.
02Can it hold two smaller devices?
Yes. Its divider separates the stand into two adjustable clamping sections.
03Can I make it a two-tier stand?
Yes, with an additional MDS-100 and expander.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
6 detailsSize & weight
- Clamping Surface Depth
- 8.34 inch
- Clamping Width Range with Divider Each Side
- 2.84 inch–7.62 inch
- Clamping Width Range Without Divider
- 6.41 inch–15.98 inch
- Weight
- 2.8
- Clamp Height
- 0.91 inch
- Dimensions
- 18.83 inch × 7.82 inch × 5.55 inch
4 detailsOther
- Clamping Surface Max Area
- 133.27 sq. in.
- Product Type
- Modular desktop stand
- Series
- MDS
- Model
- MDS-100
