Detail 01
Five output plugs
Five pedals off one adapter, but they split one current pool. Jack count is not the real limit.
Product detailSKU #1274115035979
TruetoneMulti-Plug 5 Cable for 1 SPOT Adapter
Independent shopping perspective
The Korena take
A five-output daisy chain cable for the 1 SPOT adapter. For expanding a single-output supply to power several pedals.
Strong match
Who this is for
- Adding pedals to a board already running a 1 SPOT adapter
- Powering up to five low-draw analog stompboxes
- Keeping a spare power cable in the gig bag
Consider the trade-offs
When to look elsewhere
- Anyone needing isolated outputs to eliminate ground hum
- Boards where the adapter's current rating is already maxed out
- Pedals needing anything other than 9V center-negative
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Daisy chain wiring
All outputs share a common ground. That is why hum can pass from one pedal to another.
Detail 03
Center-negative barrel plugs
The standard pedal connector. Center-positive pedals need a polarity reverser or they may be damaged.
Detail 04
Cable, not a power supply
Produces no power on its own. It only splits what a 1 SPOT adapter already provides.
Detail 05
Brown cable jacket
Blends against a pedalboard surface rather than standing out. Purely cosmetic.
Final check
Know before you order
- 01No adapter included — this is the cable only
- 02Add up your pedals' milliamps; five jacks does not mean five pedals always fit
- 03Check plug polarity on each pedal before connecting
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this come with a power supply?
No. It is a cable that splits an existing 1 SPOT adapter's output into five. You need the adapter separately.
02Can I really power five pedals?
Only if their combined current draw stays under the adapter's rating. Low-draw analog pedals, usually yes. Digital pedals, often no.
03Will it work with other brands of adapter?
It is built for the 1 SPOT. Any 9V center-negative supply with a matching barrel jack should physically connect.
04Why do I hear hum after adding this?
Daisy chains share a ground between pedals. That shared path is how noise travels. An isolated supply is the fix.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Brown
