Korena
Product detailSKU #1500000457536

Trace ElliotDual Band Compressor Pedal Green

Trace Elliot
Trace Elliot Dual Band Compressor Pedal Green

Independent shopping perspective

The Korena take

Built for bass, Trace Elliot’s green Dual Band Compressor divides dynamic control between low and high frequencies. Lo Band and Hi Band controls, with separate makeup gain for each band, let you balance those areas independently instead of applying the same compression across the whole signal. Input and Output Level controls support gain staging around the pedal, while true bypass keeps it out of the active path when switched off. It connects through a single 1/4-inch input and output and operates from 9V DC or battery power with an internal bipolar 18V supply.

Trace Elliot Dual Band Compressor Pedal Green product detail
Product studyTrace Elliot Dual Band Compressor Pedal Green

Strong match

Who this is for

  • Bass rigs needing separate control of low- and high-frequency dynamics.
  • Balancing bass-band levels before sending a single 1/4-inch output to the next device.
  • Live or studio bass signal chains where true bypass is required when compression is off.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Dual-band compression

Low and high frequencies are handled separately rather than by one full-range compressor section.

Detail 02

Input Level and Output Level controls

Provides level adjustment before and after the compression stage.

Detail 03

Lo Band and Hi Band controls

Gives separate control over the pedal’s low- and high-frequency bands.

Detail 04

1 x 1/4-inch input; 1 x 1/4-inch output

Uses one quarter-inch connection at both the input and output.

Detail 05

Bipolar 18V internal supply

Runs internally from a bipolar 18V supply while accepting 9V DC or battery power.

Final check

Know before you order

  1. 01The pedal has one 1/4-inch input and one 1/4-inch output.
  2. 02Use 9V DC power or a battery.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the low and high ranges be controlled separately?

Yes. Its dual-band design separates low and high frequencies, with independent makeup gain for each band.

02What controls are on the pedal?

Input Level, Output Level, Lo Band, and Hi Band.

03Does it offer true bypass?

Yes.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Controls
Input Level, Output Level, Lo Band, Hi Band
2 detailsBody & build
Color
Green
Type
Compressor
3 detailsConnections & power
Outputs
1 x 1/4 inch
Power Requirements
9V DC
Inputs
1 x 1/4 inch
1 detailsOther
Bypass
True bypass

Complete your setup

Worth comparing

More from Trace Elliot