Korena
Product detailSKU #1274115036941

ThomastikDominant 4/4 Size Violin Strings 4/4 Steel E String, Loop End

Thomastik
Thomastik Dominant 4/4 Size Violin Strings 4/4 Steel E String, Loop End

Independent shopping perspective

The Korena take

A single loop-end steel E string for full-size violin. Buy it as a replacement or spare, not as a full restring.

Thomastik Dominant 4/4 Size Violin Strings 4/4 Steel E String, Loop End product detail
Product studyThomastik Dominant 4/4 Size Violin Strings 4/4 Steel E String, Loop End

Strong match

Who this is for

  • Violins with a loop-end fine tuner on the E
  • Swapping a broken E mid-rehearsal
  • Carrying a backup E in the case

Consider the trade-offs

When to look elsewhere

  • Tailpieces built only for ball-end strings
  • Players who need all four strings replaced
  • Fractional-size violins under 4/4

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Loop end

The end is a small wire loop, so it needs a hooked E-string fine adjuster. It will not sit in a plain ball-end slot.

Detail 02

Steel E

Plain steel core. Bright, quick to settle, and less pitch drift than a synthetic string in its first days.

Detail 03

Single E string

One string only. Your other three are untouched, so tone across the set may not match evenly.

Detail 04

4/4 size

Sized for a full-size violin. On a smaller instrument the extra length bunches at the peg.

Detail 05

$8.80

The cheapest way to fix one broken string. Four singles would cost more than a packaged set.

Final check

Know before you order

  1. 01Confirm your E fine tuner has a hook, not a ball slot
  2. 02Loop-to-ball adapters are not included
  3. 03Loops can kink — seat it in the adjuster before tightening

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What is the difference between loop end and ball end?

Loop end is a bare wire loop that hooks onto an E-string fine adjuster. Ball end has a small bead that drops into a slotted tailpiece. They are not interchangeable without an adapter.

02Do I need a fine tuner for this?

You need a hooked E adjuster or a tailpiece hook to hold the loop. A plain ball-end slot will not retain it.

03Is this one string or a set?

One string: the E. Order the Dominant set if you want to replace G, D and A too.

04Will it fit a 1/2 size violin?

No. It is made for 4/4 full size.