Detail 01
Included swiveling bracket
Allows the speaker to be angled and swiveled during installation.
Product detailSKU #1500000420976
TannoyVMS 1 200W 5" Compact Install Monitors
1/6
Independent shopping perspective
The Korena take
The VMS 1 is a compact monitor for fixed installations, using a 135 mm paper-cone low-frequency driver and a 13 mm PEI-dome high-frequency driver. Tannoy positions it for recording, mixing, playback, home-studio, and commercial-install work, with a quoted 70 Hz–20 kHz response at -10 dB. Its included swiveling bracket lets you angle the enclosure during installation, while spring-loaded terminals accept bare wire, banana plugs, and spade connectors. The cabinet uses ABS construction and a perforated steel grille.
Strong match
Who this is for
- Installing compact playback or monitoring positions in a home studio.
- Mounting fixed speakers in bars, restaurants, retail spaces, or similar commercial venues.
- Adding a bracket-mounted speaker within a home-theater surround installation.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Spring-loaded terminals
Accept bare wire, banana plugs, and spade connectors.
Detail 03
4 ohm nominal impedance
The stated nominal impedance is 4 ohms.
Final check
Know before you order
- 01Confirm your planned cabling uses bare wire, banana plugs, or spade connectors.
- 02Allow for the included bracket when planning the mounting position.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is a mounting bracket included?
Yes. The VMS 1 includes a swiveling mounting bracket.
02What connections can the terminals accept?
The spring-loaded terminals accept bare wire, banana plugs, and spade connectors.
03What is the quoted frequency response?
70 Hz to 20 kHz at -10 dB.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Response
- 70Hz to 20kHz (-10dB)
- Nominal Impedance
- 4 ohm
- Sensitivity
- 86dB (1 W @ 1 m)
1 detailsConnections & power
- Recommended Amplifier Power
- 5W
2 detailsSize & weight
- Diameter Material Type Hf
- 13 mm (0.5 inch), black PEI dome
- Diameter Material Type Lf
- 135 mm (5.3 inch), black paper cone
5 detailsOther
- Continuous
- 25W
- Crossover Point
- 5.2kHz
- Nominal Dispersion 2khz
- 150° H x 115° V @ -6dB points
- Peak
- 100W
- Maximum SPL
- 100dB (25W @ 1 M)
