Detail 01
Memory lock
Clamps to the tube below a joint so the section drops to the same spot every setup. Saves adjusting by eye.
Product detailSKU #1274115042044
TAMAMemory Lock
Independent shopping perspective
The Korena take
A small TAMA clamp collar that locks a hardware setting so it returns to the same height or angle every time. For drummers who tear down often.
Strong match
Who this is for
- Gigging drummers who set up and break down every night
- Repeating an exact cymbal or tom height across rehearsals
- Stopping a stand tube from slipping under repeated hits
Consider the trade-offs
When to look elsewhere
- Drummers with a kit that never moves
- Anyone needing a full replacement stand tube or wing nut
- Hardware with a tube diameter this collar does not match
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Diameter-specific
It only grips one tube size. The wrong size will not tighten or will slide off entirely.
Detail 03
Metal collar with a tightening screw
Takes the load off the main wing nut, so a heavy cymbal is less likely to creep down mid-set.
Detail 04
Sold as a single part
A full kit needs several. Budget one per joint you want to lock.
Final check
Know before you order
- 01Measure the tube it will clamp to; memory locks are not one-size-fits-all
- 02One lock covers one joint — count your stands before ordering
- 03Overtightening on thin tubing can dent it; snug is enough
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What does a memory lock actually do?
It clamps to a stand or rod at your chosen setting so the part stops in the same place after every teardown.
02How many do I need?
One per adjustment point you want to repeat. Most drummers start with cymbal stands and tom mounts.
03Will it fit other brands?
Only if the tube diameter matches. Measure your hardware first rather than assuming.
04Does it replace the wing nut?
No. It works alongside it, taking the weight so the wing nut is not the only thing holding position.
