Detail 01
Three selectable power-amp modes: A, B, and C
Lets you choose among the head’s three available power-amp voicings.
Product detailSKU #1500000457169
SynergySYN-20IR Tube Amp Head and Synergy IICP Module Bundle
1/16
Independent shopping perspective
The Korena take
Built around Synergy’s 20W EL84 platform, this bundle pairs the head’s clean channel with the IICP module’s two independently controlled channels. The module covers clean sounds, mid-focused overdrive, and higher-gain distortion, while the head adds selectable power-amp modes, programmable onboard IRs, MIDI presets, and multiple output formats. It is a compact modular rig for guitarists who want to move between clean and driven settings while retaining the option to change official Synergy modules later.
Strong match
Who this is for
- Recording or direct-routing setups that benefit from XLR, line, headphone, and cabinet-simulation output options.
- Players needing a clean channel alongside two IICP module channels with separate gain, volume, and EQ controls.
- MIDI-controlled rigs requiring up to 128 programmable presets and per-channel IR assignment.
Consider the trade-offs
When to look elsewhere
- Players who need more than four onboard IR locations.
- Players looking to use preamp modules outside the official Synergy module range.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four onboard IRs, programmable per channel
Cabinet-simulation selections can be assigned separately across the three channels.
Detail 03
Under 1 ms latency
The IR engine is specified with latency below one millisecond.
Detail 04
1x16-ohm, 2x8-ohm parallel, and 2x4-ohm parallel speaker outputs
Provides three listed speaker-output configurations.
Detail 05
14 x 8.5 x 7.5 inches; 16.4 lb.
A compact head format for a tube-powered modular setup.
Final check
Know before you order
- 01IR management uses the included 6-foot USB cable and Synergy Editor Software.
- 02Future module changes require official Synergy modules, which are sold separately.
- 03The head provides the listed 16-ohm, dual 8-ohm parallel, and dual 4-ohm parallel speaker outputs.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels are available?
There are three: the amp head’s clean channel plus two channels from the IICP module.
02Can I use headphones?
Yes. It has a headphone output with its own volume control.
03Can I store MIDI settings?
Yes. The head supports up to 128 programmable MIDI presets.
04Can IRs be set differently for each channel?
Yes. Its four onboard IRs are programmable per channel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Preamp Module Compatibility
- Official Synergy modules (sold separately)
7 detailsConnections & power
- Outputs
- XLR balanced, 1/4 inch line output, headphone out with volume control
- USB
- Included 6' USB cable for IR management
- Voltage
- Universal voltage selector for global use
- MIDI
- Up to 128 programmable presets
- Speaker Outputs
- 1x16 ohm, 2x8 ohm (parallel), 2x4 ohm (parallel)
- Power Output
- 20W EL84 tube-driven power amp
- Power Amp Structure
- 3 selectable modes (A, B, C)
4 detailsSize & weight
- Weight
- 16.4
- Depth
- 8.5 inch
- Width
- 14 inch
- Height
- 7.5 inch
8 detailsOther
- Reactance
- Dynamic presence control
- Latency
- Under 1 ms
- Master Volume
- Global volume control
- Channels
- 3 (Clean + 2 preamp module channels)
- Ir Loader
- Free Synergy Editor Software (USB connection)
- Tubes
- 2 x EL84, 2 x 12AX7 (additional 12AX7 tubes in modules)
- Ir Slots
- 4 onboard IRs (programmable per channel)
- Fx Loop
- Ultratransparent series FX loop
