Detail 01
Morgan AC module: two channels, three-band EQ, and bright switch
The module supplies two channels and dedicated EQ plus bright-switch tone shaping.
Product detailSKU #1500000457163
SynergySYN-20IR Tube Amp Head and Morgan AC Module Bundle
rockshredalternative
1/14
Independent shopping perspective
The Korena take
The SYN-20IR and Morgan AC module bundle places a Morgan AC-style preamp into a 20W EL84 modular tube head. Alongside the head’s dedicated clean channel, the two-channel AC module brings sparkling cleans, harmonically rich overdrive, and the British character described for Morgan’s AC series. Its three-band EQ and bright switch provide the module’s core tone-shaping controls. The SYN-20IR adds selectable power-amp modes, onboard cabinet-simulation IRs, direct outputs, and MIDI-programmable presets for a rig that can be configured around the module.
Strong match
Who this is for
- Setting up clean and overdrive sounds across the head’s clean channel and two-channel Morgan AC module.
- Direct-routing guitar setups using cabinet-simulation IRs, balanced XLR, line, or headphone outputs.
- MIDI-controlled rigs that need programmed preset recall.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four onboard IRs, programmable per channel
Cabinet-simulation choices can be assigned separately across the available channels.
Detail 03
20W EL84 tube-driven power amp
The head’s power section is rated at 20 watts and uses two EL84 tubes.
Detail 04
Global master volume
One master control governs the overall volume.
Final check
Know before you order
- 01Further module expansion requires official Synergy modules, sold separately.
- 02Manage IRs over USB with the included 6-foot cable and Synergy Editor Software.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What controls are on the Morgan AC module?
It has two channels, a three-band EQ, and a bright switch.
02Does the head have its own clean channel?
Yes. The SYN-20IR provides a clean channel in addition to the module’s two channels.
03What direct outputs are available?
The head offers balanced XLR, 1/4-inch line output, and a headphone output with volume control.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Preamp Module Compatibility
- Official Synergy modules (sold separately)
7 detailsConnections & power
- Outputs
- XLR balanced, 1/4 inch line output, headphone out with volume control
- USB
- Included 6' USB cable for IR management
- Voltage
- Universal voltage selector for global use
- MIDI
- Up to 128 programmable presets
- Speaker Outputs
- 1x16 ohm, 2x8 ohm (parallel), 2x4 ohm (parallel)
- Power Output
- 20W EL84 tube-driven power amp
- Power Amp Structure
- 3 selectable modes (A, B, C)
4 detailsSize & weight
- Weight
- 16.4
- Depth
- 8.5 inch
- Width
- 14 inch
- Height
- 7.5 inch
8 detailsOther
- Reactance
- Dynamic presence control
- Latency
- Under 1 ms
- Master Volume
- Global volume control
- Channels
- 3 (Clean + 2 preamp module channels)
- Ir Loader
- Free Synergy Editor Software (USB connection)
- Tubes
- 2 x EL84, 2 x 12AX7 (additional 12AX7 tubes in modules)
- Ir Slots
- 4 onboard IRs (programmable per channel)
- Fx Loop
- Ultratransparent series FX loop
