Detail 01
Dual-engine operation
Runs two independent delay or reverb engines simultaneously.
Product detailSKU #1500000488526
StrymonTimeLine MX Delay Guitar Effects Pedal
1/4
Independent shopping perspective
The Korena take
TimeLine MX is a delay-and-reverb pedal built around two independent processing engines that can run together in series, parallel or split routing. Its 11 delay engines include dTape, dBucket, Digital, Drum, Oil Can, MultiTap, Spectral, Reverse, Ice, Lo-Fi and Filter, with a reverb engine also available. A five-minute stereo looper, stereo I/O, configurable effects loop and MIDI connections make it adaptable to involved stage or studio routing. The OLED screen and dedicated controls keep Time, Repeats, Filter, Grit, Speed, Depth and Mix accessible from the pedal.
Strong match
Who this is for
- Combining two processing engines in series, parallel or split signal paths.
- Building stereo delay and reverb setups with MIDI-controlled stage or studio routing.
- Creating layered loop parts with the built-in five-minute stereo looper.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 × 1/4-inch stereo inputs and outputs
Provides stereo connections at both input and output.
Detail 03
Mono or stereo send/return effects loop
Lets the effects loop be configured for mono or stereo use.
Detail 04
24-bit/96 kHz A/D and D/A conversion
States the pedal’s listed conversion format.
Detail 05
Selectable true or buffered bypass
Lets you choose between its two listed bypass options.
Final check
Know before you order
- 01Requires a 9V DC center-negative power supply rated for at least 500mA.
- 02Confirm space for the 7 × 5 × 1.87-inch enclosure and connections for your routing plan.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can it run delay and reverb together?
Yes. Its dual-engine operation can run two independent delay or reverb engines at the same time.
02Which MIDI connections are available?
DIN, TRS and USB-C MIDI are supported.
03How long is the looper?
The built-in looper records up to five minutes in stereo.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsPickups & controls
- Controls
- Time, Repeats, Filter, Grit, Speed, Depth, Mix, Type, Value
- Footswitches
- A, B, Tap
1 detailsBody & build
- Country of Origin
- USA
9 detailsConnections & power
- Outputs
- 2 x 1/4 inch (stereo)
- USB
- USB-C
- Inputs
- 2 x 1/4 inch (stereo)
- MIDI
- DIN, TRS, USB-C
- Input Impedance
- 1 Mohm
- Output Impedance
- 100 ohm
- Expression Input
- Yes
- Power Supply
- 9V DC center-negative
- Maximum Input Level
- +10dBu
3 detailsSize & weight
- Height
- 1.87 inch
- Depth
- 5 inch
- Width
- 7 inch
16 detailsOther
- Audio Routing
- Series, parallel, split
- Signal to Noise Ratio
- 116dB (typical)
- Reverb Engine
- Yes
- Looper
- 5-minute stereo
- Current Draw
- 500mA minimum
- Bypass Type
- True bypass or selectable buffered bypass
- A D Amp D A Conversion
- 24-bit/96kHz
- Delay Engines
- dTape, dBucket, Digital, Drum, Oil Can, MultiTap, Spectral, Reverse, Ice, Lo-Fi, Filter
- Dual Engine Operation
- Yes
- Model
- Z120-TLMX
- Fx Loop
- Mono or stereo send/return
- Display
- OLED
- Processor
- Tri-core 800 MHz ARM
- Analog Dry Path
- Yes
- Product Type
- Delay and reverb pedal
- Processing
- 32-bit floating point
