Detail 01
Hi-hat clutch
Clamps the top cymbal to the pull rod and sets how loosely it sits, which controls sloshiness and chick.
Product detailSKU #1274115064907
Sound Percussion LabsSPC07 Pro Hi-Hat Clutch
Independent shopping perspective
The Korena take
Replacement hi-hat clutch that holds the top cymbal on the pull rod. Buy when the original is lost, stripped, or will not stay set.
Strong match
Who this is for
- Replacing a clutch that slips out of position mid-set
- Backup gear kept in the hardware bag
- Older stands where the original clutch went missing
Consider the trade-offs
When to look elsewhere
- Drummers wanting a drop clutch for double-pedal work
- Anyone whose hi-hat problem is the stand mechanism, not the clutch
- Players needing a specific thread to match a premium stand
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Threaded adjustment
Loosening the felts lets the top cymbal float for a wetter, longer wash. Tightening gives a crisper, shorter chick.
Detail 03
Not a drop clutch
You cannot release the top cymbal to a closed position on the fly for double-bass sections.
Detail 04
Budget hardware tier
Basic locking design. Check it after loud sets — cheap clutches are the part most likely to walk loose.
Final check
Know before you order
- 01Confirm the clutch threads match your stand's pull rod before ordering
- 02Reuse your old felts and washers if the new ones are thin or missing
- 03Set the lock nut firmly — an untightened clutch drifts and kills your chick
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this a drop clutch?
No. It holds the top cymbal in a fixed position on the pull rod. A drop clutch is a separate design for releasing the hats closed.
02Will it fit any hi-hat stand?
Most pull rods use a common thread, but not all. Check your stand's rod thread before ordering, especially on older or off-brand stands.
03Does it come with felts?
Keep your existing felts and washers as backup. Worn or missing felts let metal touch cymbal, which risks cracking the bell area.
04Why does my hi-hat keep loosening?
Usually the lock nut on the clutch backing off from vibration. If the threads are stripped, no amount of tightening fixes it — replace the clutch.
