Detail 01
Variable Harmonic Drive
Select second-order harmonic warmth or third-order harmonic edge at the input.
Product detailSKU #1500000472687
Solid State LogicSuper 9000 Analog Channel Strip
1/8
Independent shopping perspective
The Korena take
Built for a rack-based recording or mix setup, the Super 9000 combines a SuperAnalogue input path, variable harmonic drive, dynamics and four-band EQ in one rack space. Use the mic path for recording, or flip the dedicated line input through that preamp path when processing line-level material. Its switchable EQ circuits, insert routing and external sidechain connection make signal order and control choices part of the workflow rather than a fixed path.
Strong match
Who this is for
- Recording vocals or instruments with a choice between SuperAnalogue and Variable Harmonic Drive input paths
- Processing line-level DAW stems through the mic preamp path using Line Input Flip
- Building a stereo-linked processing pair with two Super 9000 units
Consider the trade-offs
When to look elsewhere
- Standalone stereo pairing; sidechain linking requires a second Super 9000 unit
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Switchable pre/post EQ dynamics routing
Place the dynamics section before or after EQ to suit the processing order.
Detail 03
G-Series and E-Series EQ circuits
Choose between the Pink Knob and Black Knob EQ options.
Detail 04
Balanced insert with routing options
Patch external hardware after the input stage or immediately before the output.
Detail 05
Switchable input/output metering
Monitor either the incoming or outgoing signal.
Final check
Know before you order
- 01Stereo linking is available only when paired with a second Super 9000.
- 02Mic input impedance is selectable between 1.3 kohm and 11 kohm.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can it add harmonic character?
Yes. Variable Harmonic Drive offers second-order warmth and third-order edge.
02Can I use an external sidechain signal?
Yes. It has an external sidechain input, and filters and EQ can be routed to the sidechain.
03Does it have a line input?
Yes. A dedicated line input can be routed through the mic preamp with Line Input Flip.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response
- ±0.1dB between 20Hz–20kHz
- Impedance Options
- 1.3 kohm and 11 kohm
3 detailsPickups & controls
- Hold Control
- Yes
- Harmonic Control
- 2nd order (warmth) and 3rd order (edge)
- Circuit Options
- G-Series (Pink Knob) and E-Series (Black Knob)
3 detailsBody & build
- Type
- 4-band fully parametric
- Sidechain Linking
- Yes (works with a second unit for stereo pairing)
- Sidechain Routing
- Filters and EQ can be routed to sidechain
6 detailsConnections & power
- Line Input
- Dedicated
- Phantom Power
- Yes (+48V)
- Mic Input
- XLR
- Input Flip
- Yes (routes line input through mic pre)
- External Sidechain Input
- Yes
- Output Trim
- Yes
16 detailsOther
- Signal Path
- SuperAnalogue technology
- Polarity Invert
- Yes
- Pre Post EQ
- Switchable
- Pad
- Yes
- Metering
- Switchable input and output
- Mid Band Flexibility
- Frequency division/multiplication options
- Knee Modes
- Peak/hard knee and soft knee
- High Pass Filter
- 18dB/octave
- Rack Size
- 1 RU
- Product Type
- Analog channel strip
- Low Pass Filter
- 12dB/octave
- Series
- Super 9000
- Insert Point
- Yes, with routing options
- Attack Modes
- Fast/normal
- Expander Gate
- Yes, with variable hysteresis
- Compressor Type
- THAT 2181A VCA
