Detail 01
20 spaces split 14 top / 6 bottom
Two separate compartments, not one open 20U bay. Decide the split before you buy; you cannot mount an 8U unit across it.
Product detailSKU #1274115027141
SKBMighty GigRig Rolling Rack System Black
1/5
Independent shopping perspective
The Korena take
A 20-space rolling rack, 14U on top and 6U below, for touring rigs and mobile studios. 55.5 lb empty, so stairs are the real limit.
Strong match
Who this is for
- Touring rigs that need processing up top, heavier gear below
- Mobile recording or PA setups moved venue to venue
- Loading-dock and flat-floor venues where wheels do the work
Consider the trade-offs
When to look elsewhere
- Rigs under about 8 spaces — you haul empty weight
- Stair-access venues or one-person load-ins
- Chassis deeper than 26 inches rail to rail
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
26 inch rail-to-rail depth
That is the longest chassis you can bolt in. Deep power amps and some servers exceed it.
Detail 03
28.25 inch front rail to back lid
The 2-plus inches behind the rails is your cable run. Right-angle plugs still help on tight patches.
Detail 04
24 x 32 inch exterior footprint
Deeper than it is wide. Measure van shelves, lift gates, and stage-left corners before it ships.
Detail 05
55.5 lb empty
Before a single unit goes in. A full rig becomes a two-person lift onto a truck.
Detail 06
Rolling
Wheels solve flat floors and long corridors. They do nothing for stairs or gravel.
Final check
Know before you order
- 01Measure your deepest chassis against the 26 inch rail-to-rail before committing
- 02Add your gear weight to 55.5 lb and check who lifts it
- 03Verify door widths and lift gate depth for a 32 inch footprint
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many rack spaces is this?
Twenty total, split as 14 in the top section and 6 in the bottom. They are separate compartments, so a single unit taller than 14U will not fit.
02How deep a rack unit will fit?
Rail to rail is 26 inches, with 28.25 inches from the front rail to the back lid. Measure your deepest amp chassis, including rear connectors.
03How much does it weigh empty?
55.5 lb before you mount anything. Loaded with amps and power conditioning, plan on a two-person lift into a vehicle.
04Can one person move it?
On flat ground, yes — it rolls. Stairs, ramps, and truck loading are a two-person job once gear is installed.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Rack Space Units Top
- 14
9 detailsSize & weight
- Exterior Depth
- 32 inch (81.28cm)
- Interior Height
- 29.50 inch (74.93cm)
- Exterior Height
- 26 inch (66.04cm)
- Product Weight
- 55.50 lb. (25.17 kg)
- Weight
- 55.5
- Exterior Width
- 24 inch (60.96cm)
- Interior Width
- 19 inch (48.26cm)
- Rack Depth Rail to Rail
- 26 inch (66.04cm)
- Rack Depth Front Rail to Back Lid
- 28.25 inch (71.76cm)
2 detailsOther
- Rack Space Units Bottom
- 6
- Rack Space Units Total
- 20
